this is what i did over the weekend
1x skrs
1x chrome extention 9 inches
1x raceroom g25 mount
[ external image ]
my shifter project
Re: my shifter project
What's the feel with such a long stick? It got too loose or the shifter movement end too wide on the tip?
I made my my own shifter with range/splitter buttons to replace original from G27, but when i get to the testing process while testing with just 10cm extention i felt that the shifter itself got too loose, so i decided to don't extend more (initially i intended to do as long as you did)
Can you post pictures of it on gear 1 and 6 so i can see how distant from the center the shifter gets.
BTW it looks really good, congrats!
I made my my own shifter with range/splitter buttons to replace original from G27, but when i get to the testing process while testing with just 10cm extention i felt that the shifter itself got too loose, so i decided to don't extend more (initially i intended to do as long as you did)
Can you post pictures of it on gear 1 and 6 so i can see how distant from the center the shifter gets.
BTW it looks really good, congrats!
Re: my shifter project
thank you and to answer your question the feel is fine its 7 inches up and 7 inches down from the center and 4 inches to the right and 4 inches to the left from the center of the shifter
[ external image ]
[ external image ]
[ external image ]
[ external image ]
Re: my shifter project
Thanks!
Now I think I have some modifications to do on mine next weekend.
Now I think I have some modifications to do on mine next weekend.
-
- Posts: 6
- Joined: 11 Mar 2017 02:05
Re: my shifter project
Looks awesome are there any good tutorials on how to do this for the TH8RS?
Re: my shifter project
well first you need a place to mount it on a table, build your own, or order a mount like i did here https://www.raceroomstore.com/us/schalt ... lator.html
then you need a skrs shifter and choose the thrustmaster adapter https://csio.tech/product/skrs-official-v01 warning you here it take time for csio to deliver your shift knob
next you need a extension if you decide to get the shiftier here http://www.empirechromeshop.com/search. ... +extension pick whatever one you want
next when you get the skrs shifter do this if you got the extension https://www.youtube.com/watch?v=W2WN0xPE5XM but take the adapter and put it on the thrustmaster shifter and take the extension and thread it on the adapter on the thrustmaster and take the nut and thread it on the extension, then take your skrs and take the cover off by removing the two screws and plug in the wire into the board, slide the cover back on and put the two screws back on. Screw the skrs half way on extension , center it and take a 19mm or a standard wrench or vise grips and tighten the nut, once everything is good see if the skrs moves to see if it is tight and you are all set just plug the usb in to a open usb port and happy trucking
then you need a skrs shifter and choose the thrustmaster adapter https://csio.tech/product/skrs-official-v01 warning you here it take time for csio to deliver your shift knob
next you need a extension if you decide to get the shiftier here http://www.empirechromeshop.com/search. ... +extension pick whatever one you want
next when you get the skrs shifter do this if you got the extension https://www.youtube.com/watch?v=W2WN0xPE5XM but take the adapter and put it on the thrustmaster shifter and take the extension and thread it on the adapter on the thrustmaster and take the nut and thread it on the extension, then take your skrs and take the cover off by removing the two screws and plug in the wire into the board, slide the cover back on and put the two screws back on. Screw the skrs half way on extension , center it and take a 19mm or a standard wrench or vise grips and tighten the nut, once everything is good see if the skrs moves to see if it is tight and you are all set just plug the usb in to a open usb port and happy trucking