speed limit does not work

Post Reply
profesh
Posts: 1
Joined: 04 Feb 2016 21:45

speed limit does not work

#1 Post by profesh » 06 Feb 2016 12:34

I have in options checked speed limit, but it does not do anything
Murph
Posts: 220
Joined: 06 Dec 2015 14:37

Re: speed limit does not work

#2 Post by Murph » 07 Feb 2016 00:41

The speed limiter in the options is almost certainly the same as in ETS2. I've not tried it in ATS, but the ETS2 implementation does what is required by EU law, it limits the max speed to 90 km/h (approx. 55 mph). What it does not do, is prevent you speeding in places with lower limits, such as city streets.

I don't know what the limiter will be set to in ATS, but 55 mph is a likely possibility. Another possibility is that it may vary by state, e.g. 55 mph in CA, 80 mph in NV. Have you tried exceeding 55 with it enabled (might not be easy to do that when pulling a medium to heavy load, particularly if you are driving a truck with the very underpowered 370hp ISX12)?
aadje93
Posts: 2
Joined: 14 Jun 2014 07:09

Re: speed limit does not work

#3 Post by aadje93 » 07 Feb 2016 12:02

speed limiter in ATS is 65mph (109km/hr) which is a bit on the high side for a oversize trucker. Don't mind me coming with over a 100km/hr loaded with 77tons through las vegas.
Llewelyn
Posts: 310
Joined: 13 Jul 2013 12:50

Re: speed limit does not work

#4 Post by Llewelyn » 09 Feb 2016 19:26

Like they said. The max for trucks in EU is 90km/h so that's what the speed limiter is set to. In many places the actual speed limit is under 90 for trucks though. I believe we still have a derogation that allows UK use only trucks to be limited to 60 mph (which is the max limit in UK).

The ATS limit is set at 65 mph, but I've noticed that once you get out of CA you find limits up to 80 over the line in Nevada so I turned it off :)

for sticking to the 55 limit in CA, use the cruise control, buy a transmission with a retarder and set the right options it'll work on the downgrades as well.
User avatar
Max
SCS Software
Posts: 6479
Joined: 26 Nov 2012 10:00
Location: SCS, Prague

Re: speed limit does not work

#5 Post by Max » 09 Feb 2016 19:51

65mph was chosen because its average speed limit that trucking companies have set on their trucks.
also, there are some planes for federal limit and values in mind are around 65mph again.
but as there in no law yet (unlike europe) there is no limit by default.

speed limit value can be changed in game_data.sii.
Nobody can tell you anything about it. Those who know about it aren't allowed to talk. And those who talk know nothing.
User avatar
Fae
Posts: 1067
Joined: 05 Aug 2013 18:35
Location: Colorado
Contact:

Re: speed limit does not work

#6 Post by Fae » 10 Feb 2016 00:51

In Colorado make that average speed 80. Most people consider it normal to see traffic navigating around a truck, but here ... the trucks flow smoothly with traffic, and it is awesome. :)

BUT ... companies like Swift (who are ANYTHING but Swift ... oxymoron anyone?) have ALL of their company trucks regulated to 65MPH. If you have your own equipment, you might be able to go faster, but if you drive a Swift-owned truck you will NEVER get above 65 unless you are driving off a VERY tall cliff ... and even that is iffy.

Most other companies that regulate their company trucks are the same - regulated to 65. And that is as low as you DARE to regulate a truck. The reason being is, even for trucks where I live, it is illegal to drive more than 15 MPH below the speed limit (the ONLY two exceptions: during a blizzard or during an escorted oversize load with proper warnings, beacons, etc.) The speed limit here is 80 MPH on all freeways outside of city limits. I-25 and I-70 stay 80 on all areas outside the city, and 65 is the lowest I have seen in the city. However I-70 DOES drop to lower limits as it negotiates the mountain pass (I forget the name of the pass), I think it drops to 55 for a bit there around a hairy turn.

The in-game limiter being 65, then, is perfect as it does match what some companies do in real life here. Don't forget to sport your Swift skin if you have it activated ;)
Faelandaea Dravin
OTR Truck Driver
Faelandaea's Trucking Adventures
https://www.youtube.com/c/FaelandaeaDravin
DISCORD: https://discord.gg/PEm7M9HwYP
[ external image ]
User avatar
Lexx
Posts: 1014
Joined: 04 Feb 2016 01:16
Location: Bulgaria

Re: speed limit does not work

#7 Post by Lexx » 13 Feb 2016 16:46

profesh wrote:I have in options checked speed limit, but it does not do anything
"Truck speed limit" means your truck won't exceed 65 mph. It won't limit your speed in residential areas.
My mods for other games
Sharkoon S25-W, AsRock B85M Pro4, Core i3-4170, Palit GTX 1050 Ti 4 GB, Corsair 32 GB DDR3 1600 MHz,
Corsair CX750, Corsair Force LE 120 GB, Western Digital 1.5 TB, Arch Linux KDE x64, Firefox x64
SkyeFlyer
Posts: 1
Joined: 08 Mar 2017 16:53

Re: speed limit does not work

#8 Post by SkyeFlyer » 08 Mar 2017 16:55

My father (a 30+ year trucker) used to tell me that SWIFT actually stands for "Sho' Wish I's a Fast Truck!"
User avatar
EricF
Posts: 300
Joined: 05 Feb 2017 22:16
Location: Great Lakes area, USA

Re: speed limit does not work

#9 Post by EricF » 11 Mar 2017 12:56

There's worse... Last I heard Schneider was raising their limiter speed to 63MPH, up from 60. :roll:

The recommendations going through the US lawmaking process were 60, 65 and 68MPH, with allowance for fleet operators to choose one of the approved limiter speeds. So 65 is a good average. 68 makes sense for western US operations where there are higher car speed limits; 60 will probably be popular with East Coast fleet operators where traffic is frequently denser and speed limits are usually lower overall. (But drivers running through the northern New England -- Vermont, New Hampshire and Maine -- will grumble because the Interstate highway speed limit has been raised to 70 for most of the rural areas.)
System Specs for Beta and performance comparisons:
Ryzen 9 5900x - 32GB RAM - NVMe SSD - RTX2080 Super - 3440x1440 Ultrawide - TrackIR - T248 Wheel/Pedals
User avatar
piva
Posts: 2377
Joined: 29 Oct 2014 16:41

Re: speed limit does not work

#10 Post by piva » 11 Mar 2017 16:01

If you see trucks, that going over speed limit, check your traffic_data.sii file for speed_lane_coef_gap parameter, if it is does not set, please set
speed_lane_coef_gap: 0
in your traffic_data.sii file.
I set in my home mod
speed_lane_coef_gap: 20
What value set SCS, I don't know. :roll:
Post Reply

Return to “Gameplay Questions”

Who is online

Users browsing this forum: No registered users and 4 guests