Signs On Your Truck & Trailer [ver: 1.0.3.35] [13.08.2023]
Forum rules
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
Re: Signs on your Truck [1.0.7] [22.02.2017]
Thank you very much AlexeyP and thanks for the comment.
Google translator | Greetings and cheers | Keep truckin'
[ external image ] [ external image ] [ external image ]
Discord: tobrago#1504
Everything will be okay in the end, and if it`s not okay, it`s not the end.
[ external image ] [ external image ] [ external image ]
Discord: tobrago#1504
Everything will be okay in the end, and if it`s not okay, it`s not the end.
-
Mr.GermanTruck
- Posts: 520
- Joined: 23 May 2015 19:52
- Contact:
-
Bulldozer 1973
- Posts: 1191
- Joined: 21 Dec 2012 00:27
- Location: Treuchtlingen / Germany
- Contact:
Re: Signs on your Truck [1.0.7] [22.02.2017]
@ tobrago
can you make a pmg with the Node Points for installation for any Truck.
I working on a SCANIA NEXT GENERATION.
And I would build with pleasure your Node point with one.
Half it would be nice if you pmg could provide where only the Nodes sit.
Where then can be imported in the truck in the Z-Mod or Blender.
can you make a pmg with the Node Points for installation for any Truck.
I working on a SCANIA NEXT GENERATION.
And I would build with pleasure your Node point with one.
Half it would be nice if you pmg could provide where only the Nodes sit.
Where then can be imported in the truck in the Z-Mod or Blender.
Greetings,
Harald
---
Sorry for my bad english, i from germany. I use Translators deepl.com / google.de
---
I will not distribute a modified mods without permission from the original creator / author!
Harald
---
Sorry for my bad english, i from germany. I use Translators deepl.com / google.de
---
I will not distribute a modified mods without permission from the original creator / author!
Re: Signs on your Truck [1.0.7] [22.02.2017]
@Mr.GermanTruck
Mr.GermanTruck thanks for the video.
Can I to put this video on Steam Workshop?
@ Harald-RS
Mod is unlocked so you can use the necessary files (*.pmg).
In directory "vehicle\truck\upgrade\frontsigns_a" there are files "front_signs_a.pmg" and they carry information about the locations of signs.
I apologize if I misunderstood, but my knowledge to work in the Blender tool in basic knowledge.
Thank you very much Harald-RS and thanks for the comment.
Google translator
Greetings and cheers
Keep truckin'
Mr.GermanTruck thanks for the video.
Can I to put this video on Steam Workshop?
@ Harald-RS
Mod is unlocked so you can use the necessary files (*.pmg).
In directory "vehicle\truck\upgrade\frontsigns_a" there are files "front_signs_a.pmg" and they carry information about the locations of signs.
I apologize if I misunderstood, but my knowledge to work in the Blender tool in basic knowledge.
Thank you very much Harald-RS and thanks for the comment.
Google translator
Greetings and cheers
Keep truckin'
Google translator | Greetings and cheers | Keep truckin'
[ external image ] [ external image ] [ external image ]
Discord: tobrago#1504
Everything will be okay in the end, and if it`s not okay, it`s not the end.
[ external image ] [ external image ] [ external image ]
Discord: tobrago#1504
Everything will be okay in the end, and if it`s not okay, it`s not the end.
-
Bulldozer 1973
- Posts: 1191
- Joined: 21 Dec 2012 00:27
- Location: Treuchtlingen / Germany
- Contact:
Re: Signs on your Truck [1.0.7] [22.02.2017]
@tobrago
Here a the Pictures to add your Nodes in my Truck to the Front
[ external image ]
[ external image ]
I am of the opinion this the rounds signposts are a little too large.
In real these aren't this one in diameter bigger like 10 cm.
What I mean if you understand.
Here a the Pictures to add your Nodes in my Truck to the Front
[ external image ]
[ external image ]
I am of the opinion this the rounds signposts are a little too large.
In real these aren't this one in diameter bigger like 10 cm.
What I mean if you understand.
Greetings,
Harald
---
Sorry for my bad english, i from germany. I use Translators deepl.com / google.de
---
I will not distribute a modified mods without permission from the original creator / author!
Harald
---
Sorry for my bad english, i from germany. I use Translators deepl.com / google.de
---
I will not distribute a modified mods without permission from the original creator / author!
-
Mr.GermanTruck
- Posts: 520
- Joined: 23 May 2015 19:52
- Contact:
Re: Signs on your Truck [1.0.7] [22.02.2017]
[quote="tobrago"]@Mr.GermanTruck
Mr.GermanTruck thanks for the video.
Can I to put this video on Steam Workshop?
Yes no Problem and great work
Mr.GermanTruck thanks for the video.
Can I to put this video on Steam Workshop?
Yes no Problem and great work
Re: Signs on your Truck [1.0.7] [22.02.2017]
@ Mr.GermanTruck: Thank you for permission to put video on Steam.
@ Harald-RS: What signs to reduce (3, 4, 5, E, L, EEV... or ADR signs) ? Otherwise it looks nice on your truck model. I'm sorry that I could not answer before. I had a problem with the Internet.
@ Harald-RS: What signs to reduce (3, 4, 5, E, L, EEV... or ADR signs) ? Otherwise it looks nice on your truck model. I'm sorry that I could not answer before. I had a problem with the Internet.
Google translator | Greetings and cheers | Keep truckin'
[ external image ] [ external image ] [ external image ]
Discord: tobrago#1504
Everything will be okay in the end, and if it`s not okay, it`s not the end.
[ external image ] [ external image ] [ external image ]
Discord: tobrago#1504
Everything will be okay in the end, and if it`s not okay, it`s not the end.
-
Bulldozer 1973
- Posts: 1191
- Joined: 21 Dec 2012 00:27
- Location: Treuchtlingen / Germany
- Contact:
Re: Signs on your Truck [1.0.7] [22.02.2017]
@Tobrago
No problem with the late answer.
I mean is a litte so big the round signs.
I have a problem with the slot points on the backside.
No problem with the late answer.
I mean is a litte so big the round signs.
I have a problem with the slot points on the backside.
Greetings,
Harald
---
Sorry for my bad english, i from germany. I use Translators deepl.com / google.de
---
I will not distribute a modified mods without permission from the original creator / author!
Harald
---
Sorry for my bad english, i from germany. I use Translators deepl.com / google.de
---
I will not distribute a modified mods without permission from the original creator / author!
Re: Signs on your Truck [1.0.7] [22.02.2017]
@ Harald-RS: Do you write to me what's going on with the rear signs.
It would be good to show the picture of the problem.
It would be good to show the picture of the problem.
Google translator | Greetings and cheers | Keep truckin'
[ external image ] [ external image ] [ external image ]
Discord: tobrago#1504
Everything will be okay in the end, and if it`s not okay, it`s not the end.
[ external image ] [ external image ] [ external image ]
Discord: tobrago#1504
Everything will be okay in the end, and if it`s not okay, it`s not the end.
-
Floppy#SRB
- Posts: 4
- Joined: 28 Jan 2016 23:14
- Location: Serbia
- Contact:
Who is online
Users browsing this forum: No registered users and 0 guests