If you go behind of AI truck on weight station, you will never pass weight control, because ia truck stop at green cube and don't go away.
It's look like you set wrong barier type
tr_semaphore_profile : tr_sem_prof.weight {
type[]: barrier_manual
or wrong interval for this.
I can't drive through weight station in this case since open beta is out.
Can't pass weight station [MOD]
Can't pass weight station [MOD]
Last edited by piva on 18 Mar 2017 04:32, edited 2 times in total.
- LeafeonGold
- Posts: 1832
- Joined: 09 Jun 2013 03:11
- Location: Philadelphia, PA
- Contact:
Re: Can't pass weight station
Are you tailing the truck infront of you through the scales as you do this? Because IRL, scales are one truck at a time, and you must wait until the truck infront of you clears the scale before you proceed.
"Don't try extra hard to make your presence known, but make sure your absence is noticed."
Intel I7-4790K |//| EVGA GeForce GTX 1080 FTW |//| 32GB RAM
Workshop |//| ATS Screens |//| ETS2 Screens
Intel I7-4790K |//| EVGA GeForce GTX 1080 FTW |//| 32GB RAM
Workshop |//| ATS Screens |//| ETS2 Screens
Re: Can't pass weight station
AI truck stop near green cube and don't drive, I stay behind him.
IRL truck not stop on weight station, they driving with speed no more that 5mph, or wait for green light
IRL truck not stop on weight station, they driving with speed no more that 5mph, or wait for green light
- morrelo
- SCS Software
- Posts: 1845
- Joined: 07 Dec 2012 13:39
- Location: Prague, Czech Republic
- Contact:
Re: Can't pass weight station
Do you have coordinates of the weight station? I've tried to reproduce it on one weight station and everything worked fine.
Re: Can't pass weight station
All weight stations in game.
Next time I will make screenshot and send you coordinates.
EDIT. I'm sorry my bad. Now I unpack newer def.scs and see in semaphore_profile
interval[]: (3.0, 0.0, 3.0, 5.0)
on my old file was
interval[]: (3.0, 0.0, 0.0, 0.0)
So it's already fixed.
I'm sorry again.
Thank you.
Next time I will make screenshot and send you coordinates.
EDIT. I'm sorry my bad. Now I unpack newer def.scs and see in semaphore_profile
interval[]: (3.0, 0.0, 3.0, 5.0)
on my old file was
interval[]: (3.0, 0.0, 0.0, 0.0)
So it's already fixed.
I'm sorry again.
Thank you.
Re: Can't pass weight station
I found problem weight station
; [18/03/2017 07:52] (sec-0023+0003);-90994.7;55.1018;14200.9;1.46559;-0.0530557
[ external image ]
Then I test weigh station near Ehrenberg, here work properly.
; [18/03/2017 07:52] (sec-0023+0003);-90994.7;55.1018;14200.9;1.46559;-0.0530557
[ external image ]
Then I test weigh station near Ehrenberg, here work properly.
- morrelo
- SCS Software
- Posts: 1845
- Joined: 07 Dec 2012 13:39
- Location: Prague, Czech Republic
- Contact:
Re: Can't pass weight station [NOT A BUG]
I just tried it, and again no problem on my side. Are you sure that it's not caused by some mod?
Re: Can't pass weight station [NOT A BUG]
I have many mods (how you can see on screenshot )
Thanks, I'm sorry, I forgot to say - now problem was in trigger_action file.
Thank you, now I tested ALL weigh station, all work properly.
Thanks, I'm sorry, I forgot to say - now problem was in trigger_action file.
Thank you, now I tested ALL weigh station, all work properly.
Who is online
Users browsing this forum: Baidu [Spider] and 6 guests