BDF Tandem Truck Pack v149.00 (11 November 23)

Forum rules
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
User avatar
Flemming V
Global moderator
Posts: 9224
Joined: 28 Nov 2012 10:41
Location: Denmark
Contact:

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2341 Post by Flemming V » 21 Mar 2017 06:06

TarsoMagno wrote:I found some issues
Thanks, I will look at them.
Boeing73FLY wrote:I do have suggestions for this issue
Thanks, I will also look at your suggestions.

I tried another mod the other night, 6x4 on an ordinary truck, where I could lift tag axle, and when I did, I could not drive because the liftet axle was spinning wild.
So I was thinking that maybe it's a game problem after they made differential available. Just thinking...
(Or a mod problem that is not upto date, did not have time to look into it yet, as a senior beta tester suppose to do) ;)
User avatar
LeafeonGold
Posts: 1834
Joined: 09 Jun 2013 03:11
Location: Philadelphia, PA
Contact:

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2342 Post by LeafeonGold » 21 Mar 2017 08:18

Sounds like a mod where the powered axles are set incorrectly, happened to me when modernizing another scania mod, and doing def edits without looking at the chassis in zmodeler. :lol:
"Don't try extra hard to make your presence known, but make sure your absence is noticed."

Intel I7-4790K |//| XFX Radeon RX 590 8GB |//| 16GB RAM |//| 1TB HDD​
Workshop |//| ATS Screens |//| ETS2 Screens
User avatar
Flemming V
Global moderator
Posts: 9224
Joined: 28 Nov 2012 10:41
Location: Denmark
Contact:

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2343 Post by Flemming V » 21 Mar 2017 09:06

Yes it sure sound like that, but chassis file was correct, just like mine are.
User avatar
Tarso
Beta tester
Posts: 8256
Joined: 04 Apr 2016 11:03
Location: -5.865761, -35.216600
Contact:

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2344 Post by Tarso » 21 Mar 2017 09:13

Boeing73FLY wrote: I do have suggestions for this issue, since I doubt there is a "driven" liftable axle in existance.
http://www.transportnews.co.uk/2015/10/ ... ts-a-lift/

Volvo about traction lift https://www.google.com.br/url?sa=t&rct= ... 0842,d.ZGg

Scania about chassis namings https://www.google.com.br/url?sa=t&rct= ... 0842,d.ZGg

There is technology that provide powered axles to be lifted irl, that's why i pictured as a "bug", but in case it was not Flemming intention to have power there, changing chassis namings will fix it too.

Also I already drove mods where the power lifted axle "turn off" it's power and become still.
Last edited by Tarso on 21 Mar 2017 11:28, edited 3 times in total.
User avatar
Anna K
Posts: 3485
Joined: 20 Aug 2016 04:58
Location: ᛘᛁᚦᚴᛅᚱᚦᛦ
Contact:

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2345 Post by Anna K » 21 Mar 2017 10:40

Solutech wrote: Its a bit more complicated unfortunately . Theres 2 ways you can do it .
...
Eek, I think I'll just keep using the stock ones.
🇱🇮
User avatar
Boeing73FLY
Posts: 447
Joined: 11 Jun 2013 00:00
Location: Kalos, Pokémon world -- Las Vegas, NV, USA, Earth
Contact:

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2346 Post by Boeing73FLY » 21 Mar 2017 13:18

Well there you go! Perhaps I may attempt to make an additional definition "Chassis 6x4 Tandem TAAXLIFT" exclusively for the '12 Volvo FH.
MY ESSENTIAL MOD FOR REALISM

Enhanced Driving XPerience (EDXP) 2.0 + Addons for ATS (1.47) / ETS2 (1.47)
User avatar
Tarso
Beta tester
Posts: 8256
Joined: 04 Apr 2016 11:03
Location: -5.865761, -35.216600
Contact:

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2347 Post by Tarso » 21 Mar 2017 13:20

@Boeing73FLY I knew this was coming soon or later but there is other manufacturers that already offer this type of axle in it's trucks. So, it's easier to make available to all variations, since is the next step in operation costs efficiency on the truck industry.
Last edited by Tarso on 21 Mar 2017 16:11, edited 2 times in total.
User avatar
Flemming V
Global moderator
Posts: 9224
Joined: 28 Nov 2012 10:41
Location: Denmark
Contact:

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2348 Post by Flemming V » 21 Mar 2017 14:41

TarsoMagno wrote:I found some issues:
1-Camera 2 don`t get far when at back of truck, instead it goes between cabin and tandem box
2-6x4 taglift chassis have no power on the taglift when the axle is down.
3-I couldn`t attach Cistern painted 2 axle trailer with 6x4 taglift (maybe not a bug but still not able to attach)
1. If anyone can help me with the cam I will be happy, because I think I have tried everything.
I can make sure that cam goes way behind truck and also trailer when attached, BUT I can not make it so the cam will stay behind when looking direct into rear,
the cam will then go up between the cargo box and cap, I always have to look at rear a little from the side. ALSO if I knew how I could make sure that cam does not
go into box so we don't see the box from inside when it's moving from rear to cabin? Just like we don't when it's SCS trailer.

2. This is corrected now so bot rear axles has power now. (when the axle is down)

3. I could attach 6x4 chassis to Cistern painted 2 axle trailer, but yes, we need to be more precise here in with many others.

Boeing73FLY wrote:I will run down the list of available rigid configurations and give my suggestions:
1) "Chassis 4x2 Tandem" -- OKAY
2) "Chassis 6x2 Tandem" -- RENAME TO: "Chassis 6x2*4 Tandem"
3) "Chassis 6x2 Tandem Taglift" -- RENAME TO: "Chassis 6x2*4 Tandem Taglift"
4) "Chassis 6x4 Tandem" -- OKAY
5) "Chassis 6x4 Tandem Taglift" -- RENAME TO: "Chassis 6x2 Tandem Taglift"
6) "Chassis 8x4 Tandem" -- RENAME TO: "Chassis 8x4*4 Tandem"
7) "Chassis 8x4 Tandem Taglift" -- RENAME TO: "Chassis 8x4*4 Tandem Taglift"
1) Nothing done
2) Renamed to 6x2*4
3) Renamed to 6x2*4 Taglift
4) Nothing done
5) Nothing done (Now with Power to all axles)
6) Renamed to 8x2*4
7) Renamed to 8x2*4 Taglift


Changes can be seen in next update. Thanks guys..
User avatar
fmad23
Posts: 435
Joined: 26 Nov 2016 19:46
Location: Black Forest, Germany

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2349 Post by fmad23 » 21 Mar 2017 16:31

A very big thank you Mr. Tandem for your work!

http://pic-hoster.net/view/66228/ets2_00144_cr.png.htm
User avatar
niss7g5
Posts: 6
Joined: 01 Jul 2015 16:36
Location: Surabaya, Indonesia

Re: BDF Tandem Truck Pack v75 (17-Mar-17)

#2350 Post by niss7g5 » 21 Mar 2017 17:05

ermm.. guys, i try to reducing the caro box height by editing it in blender, but it say that i have wrong PMG's format. and i can't edit the file..
i did have my cargo box edited easily in blender before the new update.

https://goo.gl/photos/WpqQs2pbMH3Y9mqq5

sorry for my bad english..
I dont't know what i have to write here.. :/
Post Reply

Return to “Trucks”

Who is online

Users browsing this forum: No registered users and 17 guests