Truck stalling
Re: Truck stalling
if there is anything to fix, it should be fixed eventually.
but right now i just don't see it. maybe i am doing something wrong and the issue did not pop up yet ...
ats and ets have same code and most of the data now.
aside of transmission ratios, only engine rpm ranges are different now (by like 100 rpm), AFAIK. but still it causes little differences in eg torque converter behavior (bit different torque characteristics near idle and so on).
but right now i just don't see it. maybe i am doing something wrong and the issue did not pop up yet ...
ats and ets have same code and most of the data now.
aside of transmission ratios, only engine rpm ranges are different now (by like 100 rpm), AFAIK. but still it causes little differences in eg torque converter behavior (bit different torque characteristics near idle and so on).
Nobody can tell you anything about it. Those who know about it aren't allowed to talk. And those who talk know nothing.
Re: Truck stalling
But Max, remember the "horny trucks" issue where trucks went "erect" as you accelerated?
This wasn't a drivetrain issue, it was a model issue.
Perhaps the longer chassis of US trucks plays a role here? Perhaps they are digging down rather than doing wheelies?
This wasn't a drivetrain issue, it was a model issue.
Perhaps the longer chassis of US trucks plays a role here? Perhaps they are digging down rather than doing wheelies?
On extended hiatus.
Re: Truck stalling
Well ok then i guess it wasn't just me..heres another example:
http://images.akamai.steamusercontent.c ... 7301758DF/
but this time in 1L gear..it kinda makes no sense to me..i know i trucker who was on the road for 42 years and he says he start in 5L with a empty trailer..
So i dont think IRL starting with this joke incline it would stall on 1L with an average load..
BTW this is again mods or no mods it makes no difference,also tried many config with my G27 and it changed nothing.
http://images.akamai.steamusercontent.c ... 7301758DF/
but this time in 1L gear..it kinda makes no sense to me..i know i trucker who was on the road for 42 years and he says he start in 5L with a empty trailer..
So i dont think IRL starting with this joke incline it would stall on 1L with an average load..
BTW this is again mods or no mods it makes no difference,also tried many config with my G27 and it changed nothing.
Re: Truck stalling
Well no, it is you.... You just seem to have a hard time accepting that.
Re: Truck stalling
do not judge community by few people only.
i would really like to understand your issue. thing is that i tested everything you wrote and had no problem with starting on higher gears.
so i am apparently doing something differently (still suppose no mods). question is what it is...
i would really like to understand your issue. thing is that i tested everything you wrote and had no problem with starting on higher gears.
so i am apparently doing something differently (still suppose no mods). question is what it is...
Nobody can tell you anything about it. Those who know about it aren't allowed to talk. And those who talk know nothing.
Re: Truck stalling
600hp pulling 19t in 2L (18 speed), and as you can hear I'm not giving it much stick. For inclines I still have 2 more gears before I go to the 2 crawlers.
https://youtu.be/ymmBupoF1PM
I'm also using AlexeyP's physics mod which makes it that bit harder.
https://youtu.be/ymmBupoF1PM
I'm also using AlexeyP's physics mod which makes it that bit harder.
Never argue with idiots. They bring you down to their level and beat you with experience.
Re: Truck stalling
uxot, could you show me your config.cfg (both generic and the one in your profile folder) and controls.sii (in your profile folder)?
Nobody can tell you anything about it. Those who know about it aren't allowed to talk. And those who talk know nothing.
Re: Truck stalling
I had no issues with the W900 625HP on 2L..(BTW which engine is that? it sounds amazing!)natvander wrote:600hp pulling 19t in 2L (18 speed), and as you can hear I'm not giving it much stick. For inclines I still have 2 more gears before I go to the 2 crawlers.
https://youtu.be/ymmBupoF1PM
I'm also using AlexeyP's physics mod which makes it that bit harder.
Re: Truck stalling
Sure but like i said i changed nothing in my files/controls its really since not 1.3 but 1.2!Max wrote:uxot, could you show me your config.cfg (both generic and the one in your profile folder) and controls.sii (in your profile folder)?
viewtopic.php?f=178&t=203889&p=542274#p542274
viewtopic.php?f=178&t=203889&p=543446#p543446
Will try to mod gear ratio's back to before 1.2 and see will post what you asked Max when i can.
Who is online
Users browsing this forum: No registered users and 8 guests