Truck stalling

User avatar
Max
SCS Software
Posts: 5988
Joined: 26 Nov 2012 10:00
Location: SCS, Prague

Re: Truck stalling

#31 Post by Max » 22 Jun 2016 06:44

if there is anything to fix, it should be fixed eventually.
but right now i just don't see it. maybe i am doing something wrong and the issue did not pop up yet ...

ats and ets have same code and most of the data now.
aside of transmission ratios, only engine rpm ranges are different now (by like 100 rpm), AFAIK. but still it causes little differences in eg torque converter behavior (bit different torque characteristics near idle and so on).
Nobody can tell you anything about it. Those who know about it aren't allowed to talk. And those who talk know nothing.

User avatar
Cadde
Global moderator
Posts: 9535
Joined: 24 Apr 2013 18:08
Location: Have no fear, i am from the internets!

Re: Truck stalling

#32 Post by Cadde » 22 Jun 2016 12:34

But Max, remember the "horny trucks" issue where trucks went "erect" as you accelerated?
This wasn't a drivetrain issue, it was a model issue.
Perhaps the longer chassis of US trucks plays a role here? Perhaps they are digging down rather than doing wheelies?
ImageGreen text = Moderator action.
ImageWhite text = Opinions and general banter.
PEBCAK errors... PEBCAK errors everywhere! If my life had a log file, it would be filled with PEBCAK...

Uxot
Posts: 382
Joined: 20 Jun 2013 00:52

Re: Truck stalling

#33 Post by Uxot » 22 Jun 2016 21:37

Well ok then i guess it wasn't just me..heres another example:

http://images.akamai.steamusercontent.c ... 7301758DF/

but this time in 1L gear..it kinda makes no sense to me..i know i trucker who was on the road for 42 years and he says he start in 5L with a empty trailer..

So i dont think IRL starting with this joke incline it would stall on 1L with an average load..

BTW this is again mods or no mods it makes no difference,also tried many config with my G27 and it changed nothing.

User avatar
JPS
Posts: 714
Joined: 15 Dec 2014 14:56

Re: Truck stalling

#34 Post by JPS » 26 Jun 2016 11:07

Well no, it is you.... You just seem to have a hard time accepting that. :roll:

Uxot
Posts: 382
Joined: 20 Jun 2013 00:52

Re: Truck stalling

#35 Post by Uxot » 28 Jun 2016 05:12

Ugh im done with this community.

User avatar
Max
SCS Software
Posts: 5988
Joined: 26 Nov 2012 10:00
Location: SCS, Prague

Re: Truck stalling

#36 Post by Max » 28 Jun 2016 07:14

do not judge community by few people only.

i would really like to understand your issue. thing is that i tested everything you wrote and had no problem with starting on higher gears.
so i am apparently doing something differently (still suppose no mods). question is what it is...
Nobody can tell you anything about it. Those who know about it aren't allowed to talk. And those who talk know nothing.

User avatar
natvander
SCS Software
Posts: 3177
Joined: 01 Feb 2015 01:42
Location: NSW, Australia

Re: Truck stalling

#37 Post by natvander » 28 Jun 2016 07:50

600hp pulling 19t in 2L (18 speed), and as you can hear I'm not giving it much stick. For inclines I still have 2 more gears before I go to the 2 crawlers.

https://youtu.be/ymmBupoF1PM

I'm also using AlexeyP's physics mod which makes it that bit harder.
Never argue with idiots. They bring you down to their level and beat you with experience.

User avatar
Max
SCS Software
Posts: 5988
Joined: 26 Nov 2012 10:00
Location: SCS, Prague

Re: Truck stalling

#38 Post by Max » 28 Jun 2016 08:03

uxot, could you show me your config.cfg (both generic and the one in your profile folder) and controls.sii (in your profile folder)?
Nobody can tell you anything about it. Those who know about it aren't allowed to talk. And those who talk know nothing.

Uxot
Posts: 382
Joined: 20 Jun 2013 00:52

Re: Truck stalling

#39 Post by Uxot » 29 Jun 2016 22:23

natvander wrote:600hp pulling 19t in 2L (18 speed), and as you can hear I'm not giving it much stick. For inclines I still have 2 more gears before I go to the 2 crawlers.

https://youtu.be/ymmBupoF1PM

I'm also using AlexeyP's physics mod which makes it that bit harder.
I had no issues with the W900 625HP on 2L..(BTW which engine is that? it sounds amazing!)

Uxot
Posts: 382
Joined: 20 Jun 2013 00:52

Re: Truck stalling

#40 Post by Uxot » 29 Jun 2016 22:31

Max wrote:uxot, could you show me your config.cfg (both generic and the one in your profile folder) and controls.sii (in your profile folder)?
Sure but like i said i changed nothing in my files/controls its really since not 1.3 but 1.2!

viewtopic.php?f=178&t=203889&p=542274#p542274

viewtopic.php?f=178&t=203889&p=543446#p543446

Will try to mod gear ratio's back to before 1.2 and see will post what you asked Max when i can.

Post Reply

Return to “Bugs 1.3”

Who is online

Users browsing this forum: No registered users and 1 guest