Splitter Operation
Splitter Operation
Dunno if it's a bug or not, but I've noticed that the operation of the splitter and range change appear to be mixed up, i.e I need to move the stick (G27 user) into neutral for a split to work, yet I can shift high--> low ---> high range just by releasing the throttle..
Re: Splitter Operation
Did you try messing around with the new settings? It is located under Options >> Controls >> Scroll down to H-shifter and play around with the first three options (shifter layout, shifter layout behavior, shifter fast split) to see if it solves your problem.
In your case I believe it might be the shifter fast split setting. But try them all if it does not work.
In your case I believe it might be the shifter fast split setting. But try them all if it does not work.
If it is stupid but it works, it isn't stupid.
Re: Splitter Operation
I tried all of them. Didn't change anything...
Re: Splitter Operation
From now on we have 4 options for the advanced type:
NONE - always have to go neutral and back on gear to make split
CLUTCH - only split if press clutch pedal (Euro way of doing things)
TROTTHLE - only split if release gas pedal (American way of doing things, let's say Eaton Fuller transmissions at least)
BOTH - keep both modes active as before the change.
NONE - always have to go neutral and back on gear to make split
CLUTCH - only split if press clutch pedal (Euro way of doing things)
TROTTHLE - only split if release gas pedal (American way of doing things, let's say Eaton Fuller transmissions at least)
BOTH - keep both modes active as before the change.
Re: Splitter Operation
I tried all of that, to no avail.
The problem I am having is that the range change appears to be the one affected, not the splitter.....
The problem I am having is that the range change appears to be the one affected, not the splitter.....
- Mohegan13
- Global moderator
- Posts: 19281
- Joined: 05 Jul 2013 09:44
- Location: West Yorkshire; Mars
- Contact:
Re: Splitter Operation
Are you using a custom layout by chance?
It's working correctly for me on all profiles.
It's working correctly for me on all profiles.
[ external image ]
I reserve the right to be 100% wrong.
Something isn't right, nothing feels the same.
Everyone around me Is a different shade of grey.
I reserve the right to be 100% wrong.
Something isn't right, nothing feels the same.
Everyone around me Is a different shade of grey.
Re: Splitter Operation
Try to delete these 3 files from you game folder on Documents
gearbox_splitter.sii
gearbox_range_splitter.sii
gearbox_range.sii
The game will create new ones on the next start
gearbox_splitter.sii
gearbox_range_splitter.sii
gearbox_range.sii
The game will create new ones on the next start
Re: Splitter Operation
I came here with the same problem as the Jarrad. Tried deleting all the files as suggested but it seems that the default Easton Fuller 13 speed still will not change gears without moving the stick (G27). In 1.3 no problems.
Re: Splitter Operation
Make sure you have selected advanced and a fast split mode different from NONE.
Please add a screenshot of this section of shifter config
Please add a screenshot of this section of shifter config
Re: Splitter Operation
Happens to me too,with a custom layout that worked as it should in 1.3,now it's reversed in 1.4
Who is online
Users browsing this forum: No registered users and 1 guest