6*2 taglift sink thru ground when raise [FIXED]

User avatar
VolvoFHfan
Posts: 173
Joined: 28 Jun 2016 19:13

6*2 taglift sink thru ground when raise [FIXED]

#1 Post by VolvoFHfan » 08 Mar 2017 13:32

When you have trailer attached and lift tag axle 2 rear axles sink trough ground and you get almost stuck.

I used michelin tires:
Front:385/55
Drive/middle:315/80
Tag/last:315/70
Last edited by VolvoFHfan on 10 Mar 2017 05:16, edited 1 time in total.
Image
This Game is called Euro Truck Simulator NOT Euro Semi Trailer Simulator- I NEED RIGIDS

User avatar
San_Sany4
Posts: 319
Joined: 26 Nov 2013 12:37
Location: Saratov, Russia

Re: volvo fh 6*2 taglift new and old sink thru ground [37189

#2 Post by San_Sany4 » 10 Mar 2017 02:57

Can confirm. Mercedes-Benz New Actros 6×2 taglift.

Taglift axle lowered:
Image

Taglift axle raised:
Image

If you drive in this state, every time there's change of road map segment, truck will bounce and lose control.
My World of Trucks profile. My Steam profile.
ETS2 since 1.4, ATS since 1.0. I play vanilla only, no mods (except MP sometimes).

User avatar
RiXeN
Posts: 1296
Joined: 09 Jun 2013 03:11
Location: Philadelphia, PA
Contact:

Re: volvo fh 6*2 taglift new and old sink thru ground

#3 Post by RiXeN » 10 Mar 2017 05:08

Well two things:

1) You aren't really supposed to drive the truck like that anyway when there's weight on the back. . . (Unless the trailer is empty)
2) The behavior with the truck losing control like that is mostly because the game doesn't increase spring/ ride height on the drive axles that don't lift, so it's essentially low-hanging weight on the back of the truck, which will pull the front axle off the ground.
"Don't try extra hard to make your presence known, but make sure your absence is noticed."

Intel I5-4690K |//| XFX Radeon R9 280x 3GB |//| 16GB RAM |//| 1TB HDD​
Workshop |//| ATS Screens |//| ETS2 Screens

User avatar
VolvoFHfan
Posts: 173
Joined: 28 Jun 2016 19:13

Re: 6*2 taglift sink thru ground when raise

#4 Post by VolvoFHfan » 10 Mar 2017 05:17

@rixen u mean thats normal then?
Image
This Game is called Euro Truck Simulator NOT Euro Semi Trailer Simulator- I NEED RIGIDS

User avatar
RiXeN
Posts: 1296
Joined: 09 Jun 2013 03:11
Location: Philadelphia, PA
Contact:

Re: 6*2 taglift sink thru ground when raise

#5 Post by RiXeN » 10 Mar 2017 05:23

Technically, both issues could be fixed if my second point was addressed somehow, because in Scandinavian countries, its normal to lift to the tag in snowy/icey conditions to get more traction, but if you look at the behavior of a truck when it lifts an axle, you'd also see it would put more pressure on the drive axle (inflate air bags?) and raise the ride height of the rear of the truck, where the game doesn't and all the weight and overhang causes the truck to sag.
"Don't try extra hard to make your presence known, but make sure your absence is noticed."

Intel I5-4690K |//| XFX Radeon R9 280x 3GB |//| 16GB RAM |//| 1TB HDD​
Workshop |//| ATS Screens |//| ETS2 Screens

User avatar
San_Sany4
Posts: 319
Joined: 26 Nov 2013 12:37
Location: Saratov, Russia

Re: 6*2 taglift sink thru ground when raise

#6 Post by San_Sany4 » 10 Mar 2017 10:34

The "correct" behaviour you are talking about was in the game in previous versions. Now wheels are clipping through the ground. You think it's not a problem?
My World of Trucks profile. My Steam profile.
ETS2 since 1.4, ATS since 1.0. I play vanilla only, no mods (except MP sometimes).

User avatar
VolvoFHfan
Posts: 173
Joined: 28 Jun 2016 19:13

Re: 6*2 taglift sink thru ground when raise

#7 Post by VolvoFHfan » 13 Mar 2017 22:49

After last update its still faulty and makes 6x2 unplayable
Image
This Game is called Euro Truck Simulator NOT Euro Semi Trailer Simulator- I NEED RIGIDS

User avatar
Ikkebana
Posts: 33
Joined: 11 May 2015 06:42
Location: Where ever the wheels take me to!

Re: 6*2 taglift sink thru ground when raise

#8 Post by Ikkebana » 16 Mar 2017 20:37

Jep
Same here.
I made video off this problem.
On trailer ,there was 17t off fish or something.
Thats not normal and didnt happend before 1.27 beta.
NB! No mods used.
https://youtu.be/qdYjcb_xLyA

cleber_oro
Posts: 251
Joined: 20 Dec 2012 21:21
Location: Brazil
Contact:

Re: 6*2 taglift sink thru ground when raise

#9 Post by cleber_oro » 17 Mar 2017 03:05

lowered
http://i.imgur.com/Zucqx7N.jpg

raised
http://i.imgur.com/QXMeJAv.jpg

I know, I know. Modded game! But everything was ok in 1.26. Cargo with 3 ton, so I think does not matter the weight.
Image                    Image                    Image

User avatar
RiXeN
Posts: 1296
Joined: 09 Jun 2013 03:11
Location: Philadelphia, PA
Contact:

Re: 6*2 taglift sink thru ground when raise

#10 Post by RiXeN » 17 Mar 2017 06:49

Ohh, looking back in the thread again I see the problem now, instead of the previous behavior before with lift axles, the non-lifted axles are sinking into the ground as if they suddenly got heavier.
"Don't try extra hard to make your presence known, but make sure your absence is noticed."

Intel I5-4690K |//| XFX Radeon R9 280x 3GB |//| 16GB RAM |//| 1TB HDD​
Workshop |//| ATS Screens |//| ETS2 Screens

Post Reply

Return to “Bugs 1.27”

Who is online

Users browsing this forum: No registered users and 1 guest