Reefer unit accessory.
Forum rules
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
-
- Posts: 800
- Joined: 30 Jul 2017 18:09
- Contact:
Reefer unit accessory.
Hi.
I find all 3 stock reefer units to be a bit of an eye sore. So i made this one ↓↓↓
It comes in 2 variants. Paintable, and white.
Also comes with the 3-color scheme shown below.
ATS 1.37 Download → of_reefer_unit_1.1.scs - 2.0 MB
ATS 1.38 Download → of_reefer_unit_1.2.scs - 2.0 MB
ATS 1.40, 1.41 Download → of_reefer_ATS_140_141.rar - 486 KB
[ external image ]
Version history:
Update 1.1
- Added variant for the Custom 53' trailer.
- Added non-paintable, white variant for the SCS trailer.
- "3 colors" paint-job for the SCS trailer.
Update 1.2
- ATS 1.38 compatibility
- removed collision
Update 1.3
- ATS 1.40 & 1.41 compatibility
- adjusted some materials
- changed logo & emblem. It's Thermo King now.
- Custom 53' trailer is no longer supported
skin template:
[ external image ]
I find all 3 stock reefer units to be a bit of an eye sore. So i made this one ↓↓↓
It comes in 2 variants. Paintable, and white.
Also comes with the 3-color scheme shown below.
ATS 1.37 Download → of_reefer_unit_1.1.scs - 2.0 MB
ATS 1.38 Download → of_reefer_unit_1.2.scs - 2.0 MB
ATS 1.40, 1.41 Download → of_reefer_ATS_140_141.rar - 486 KB
[ external image ]
Version history:
Update 1.1
- Added variant for the Custom 53' trailer.
- Added non-paintable, white variant for the SCS trailer.
- "3 colors" paint-job for the SCS trailer.
Update 1.2
- ATS 1.38 compatibility
- removed collision
Update 1.3
- ATS 1.40 & 1.41 compatibility
- adjusted some materials
- changed logo & emblem. It's Thermo King now.
- Custom 53' trailer is no longer supported
skin template:
[ external image ]
Last edited by overfloater on 31 Jul 2021 08:15, edited 7 times in total.
Re: Reefer unit accessory.
Only painted version?
My screenshots in ATS viewtopic.php?f=193&t=200792
My screenshots in ETS2 viewtopic.php?f=47&t=186996
My flickr https://www.flickr.com/photos/112668213@N02/
My screenshots in ETS2 viewtopic.php?f=47&t=186996
My flickr https://www.flickr.com/photos/112668213@N02/
-
- Posts: 800
- Joined: 30 Jul 2017 18:09
- Contact:
Re: Reefer unit accessory.
In all of the references that i've found, this specific unit was always trailer color.
- BK Vissers
- Posts: 11650
- Joined: 05 Nov 2016 16:02
- Location: Canada
- Contact:
Re: Reefer unit accessory.
I think it looks quite cool, @overfloater. Nice work, thank you.
Re: Reefer unit accessory.
If it is at all possible, can we get this for the Custom 53?
-
- Posts: 112
- Joined: 24 Feb 2016 04:10
Re: Reefer unit accessory.
@overfloater I think what you saw is the fact that the default colors for both units and trailers is white. In a lot, but not nearly all cases, the trailers could be a different color, but the unit would still arrive in white and at that point could be painted to match or not. The reefer unit would be installed by the selling dealer in most cases as the trailers are shipped from the factory without a unit typically. Until they two are sold there would be no way to know what color the unit would need to be. Many fleets that chose to paint their trailers would also choose to paint the units to match, but the unit was almost certainly white by default unless TK offered an option to paint at the factory, which is possible. Still, the default is white and that's most likely what a dealer would have on hand to sell with a new trailer. So neither option is really wrong here. It'd be cool to have a plain option, but it's nice to have the paintable one and that's the one I'd choose if I could only pick one.
- CobySanderson
- Posts: 21
- Joined: 11 Jul 2019 04:53
- Location: Florida
- Contact:
Re: Reefer unit accessory.
Omg Thanks Finally Something older to go with your Truck
- Deltatristar500
- Posts: 415
- Joined: 06 Jul 2015 14:38
Re: Reefer unit accessory.
Finally an older unit...thank you so much Overfloater
Asus Tuf Gaming Plus B550
Asus Ryzen 9 5800x3D
Asus Geforce 4080 RTX OC Edition
64GB DDR4 Ram 3600Mhz
EVGA 850W Power Supply
2 TB NVME PCIE gen 4
Windows 10
Asus Ryzen 9 5800x3D
Asus Geforce 4080 RTX OC Edition
64GB DDR4 Ram 3600Mhz
EVGA 850W Power Supply
2 TB NVME PCIE gen 4
Windows 10
Re: Reefer unit accessory.
As @racer7331 stated, that would be great if it was available for custom '53
- CapitanoAraym
- Posts: 38
- Joined: 10 Feb 2020 06:44
Re: Reefer unit accessory.
A-WE-SO-ME!!
Just a question @overfloater :
from what definition/part name of the box trailer does it take the color?
Because I puzzled by the results on my paintjobs:
[ external image ]
... the "Bj and The Bear" trailer, it seems that get the colors from the "frontal wall" (... in my .ovr, it could be both "f_body.wind_def" or "f_body.paint"):
[ external image ]
[ external image ]
BUT in my "Transformer serie", the frontal walls (both kind) are grey...
[ external image ]
... and the refeer unit is taking the color from the "accessories", becoming blue:
[ external image ]
Basically:
... I would like to understand how to "pilot" the outcome, because, for example, I could like to obtain the "accessory look" for "BJ and the Bear" trailer (in that case, all red like the accessories), meanwhile, on the contrary, on the "Transformer" trailers I could like to have them colored like the frontal wall (in those case, grey)...
Just a question @overfloater :
from what definition/part name of the box trailer does it take the color?
Because I puzzled by the results on my paintjobs:
[ external image ]
... the "Bj and The Bear" trailer, it seems that get the colors from the "frontal wall" (... in my .ovr, it could be both "f_body.wind_def" or "f_body.paint"):
[ external image ]
[ external image ]
BUT in my "Transformer serie", the frontal walls (both kind) are grey...
[ external image ]
... and the refeer unit is taking the color from the "accessories", becoming blue:
[ external image ]
Basically:
... I would like to understand how to "pilot" the outcome, because, for example, I could like to obtain the "accessory look" for "BJ and the Bear" trailer (in that case, all red like the accessories), meanwhile, on the contrary, on the "Transformer" trailers I could like to have them colored like the frontal wall (in those case, grey)...
My ATS paintshop: LINK
Who is online
Users browsing this forum: No registered users and 3 guests