[Washington DLC] US-101 Hoqiam River Liftbridges - Aberdeen [88554]

[alclark]

Game version 1.35.1.3s (rev. 2d7f5b35f37d) 64-bit
No mods, new profile
Always reproducible

The 2 US-101 drawbridges over the Hoquiam River in Aberdeen are missing a few features. The northbound bridge needs a stop line.

Code: Select all

US101 Drawbridge Aberdeen ;[13/06/2019 22:58] (sec-0027-0016);-106141;13.1449;-61657.9;0.645076;-0.182362

The southbound bridge needs a stop line and "stop here on red" signs affixed to the vertical light pole. Those lights should also flash.

Code: Select all

US101 Drawbridge Aberdeen  ;[13/06/2019 21:23] (sec-0027-0016);-106299;14.7845;-61630.8;-2.44154;-0.113244

game.log.txt

(41.76 KiB) Downloaded 118 times

[TruckerDog]

Thanks for your report!

The nortbound bridge already has the stop line. ( It has been updated internally ).

I have opened the report regarding the "stop here on red" signs missing. QA id: 88554

As for the flashing lights, it seems we must repair this on all bridges that use this type of signal.

[SchleichDi]

Not quite sure but I think one Hoquiam River sign somewhere says "Hoquaim" instead.

[TruckerDog]

@SchleichDi - It is possible that it could've been the case in the past, but at least internally I was unable to find that misspelling mistake on this bridge.

In case you find anything, just make your bug report on a new topic according to the bug reporting process. Thanks!

[FS98]

Can confirm it's just before the bridge the entering city sign spelt wrong made bug report

[KrysEmlyn]

Regarding the bridge shown in the first screenshot, I noticed something odd about it when the gate was preparing to open.
The traffic signals will display both the red and yellow lights (an amber state?) before the gate fully opens.
This signal state is never used in the US at all, and especially not in Washington. If this signal error could also be fixed, that would be great.

[Bob123412]

Was this forgotten about? As of 1.40.0.107s The bridges in Aberdeen still have no flashing lights.