Error in transmission input shaft simulation(double clutch) [114730]

[Restruct62]

Any manual gearbox, configured as "advanced" and with g_hshifter_synchronized "0" has fatal error:
Gearbox in neutral, truck is rolling.
When you depress clutch and hold it, system takes engine rpm in this moment and assigns them to input shaft gearbox speed.
After that input shaft rpm maintain this number and never slow down. If engine rpm for example were 1500 at your clutch in moment,
input shaft rpm will be 1500 as long as you hold clutch pelal. There is nonsense. Engine idles at 600 rpm, clutch in, input shaft rotates at 1500 permanently.
Actually, after clutch in input shaft would slows down from 1500 to 0 approx in 2-3 seconds.
This error makes such technic as "double clutch" absolutely impossible, but many students would be glad to implement it in game. Pls, fix it. Thanks.

[TruckerDog]

Thanks for your report. QA id: 114730