automatic gearbox new Scania S730 [117149]

Post Reply
P A I N
Posts: 45
Joined: 10 Aug 2018 16:25

automatic gearbox new Scania S730 [117149]

#1 Post by P A I N » 18 May 2020 14:18

Version Game : last
NO mods
WIndows 10 64bit

Hi scs
I play using the controller, but with the 6-speed automatic gearbox, the truck from a standstill in the accelerator starts with the sixth gear, not the first.
thanks good job = )
N95JPL
Posts: 184
Joined: 15 Apr 2020 16:02
Location: North-West England (UK)
Contact:

Re: automatic gearbox new Scania S730

#2 Post by N95JPL » 18 May 2020 16:50

If the truck can get going using 6th Gear then it will do, are you hauling a trailer? If yes, Cargo Weight?
The gearbox will automatically try and start with the highest gear it can (Better Fuel Economy & Control), if the load is too heavy it'll select a lower one etc.

N95JPL
N95JPL
GitHub
User avatar
The_SimTrucker
Posts: 592
Joined: 28 Apr 2017 19:45
Location: The Netherlands

Re: automatic gearbox new Scania S730

#3 Post by The_SimTrucker » 18 May 2020 20:17

Normally an Allison will start in 1st or 2nd gear, it should never start in 6th. I cannot reproduce it with a Scania S730 and the Scania GA867 transmission. A quick comparison with 1.36 shows that nothing in the def.scs for the transmissions except for some sound related stuf. Are you sure that your profile is clean?
P A I N
Posts: 45
Joined: 10 Aug 2018 16:25

Re: automatic gearbox new Scania S730

#4 Post by P A I N » 18 May 2020 21:07

yes my profile is clean, I try to buy new Scania, full load, empty starts with the 6th and not with the 1st ...
other trucks everything is ok
if I see that the problem persists I make a video
P A I N
Posts: 45
Joined: 10 Aug 2018 16:25

Re: automatic gearbox new Scania S730

#5 Post by P A I N » 19 May 2020 16:07

https://www.youtube.com/watch?v=H9XsTz7yydU
here is the video, no mod is applied, i bought new truck
User avatar
The_SimTrucker
Posts: 592
Joined: 28 Apr 2017 19:45
Location: The Netherlands

Re: automatic gearbox new Scania S730

#6 Post by The_SimTrucker » 19 May 2020 18:25

Ok: you are not crazy, I have the problem too now. Only when I hooked up a trailer I saw the problem: the automatic directly shifts to 6th if you give it 100% throttle, which is normal for keyboard users. If I only give it half-throttle then it shifts normally through all gears.

It seems that the Options - Controls - Adaptive Automatic Transmission settings are broken. If I set this setting to "Disabled" the transmission works correctly. But if any of the adaptive modes is selected then the transmission picks the wrong gear when accelerating full throttle.
veyron180
Posts: 2
Joined: 17 May 2020 11:17

Re: automatic gearbox new Scania S730

#7 Post by veyron180 » 23 May 2020 15:19

Deleted
Last edited by veyron180 on 15 Oct 2021 13:50, edited 2 times in total.
User avatar
Andre_AW
Beta tester
Posts: 1878
Joined: 24 Aug 2016 14:00
Location: Brazil

Re: automatic gearbox new Scania S730

#8 Post by Andre_AW » 23 May 2020 22:03

I did some tests and managed to reproduce the problems pointed out, thank you all

QA ID: 117149
TP555
Posts: 9
Joined: 19 Aug 2015 21:03

Re: automatic gearbox new Scania S730 [117149]

#9 Post by TP555 » 19 Jun 2020 20:34

Hi

Yes i can confirm that , on Scania R /S 2009/2016 , also all , Volvo FH have not this Problem

For better Reproduce , use the Handbrake , and Accelerate , the Gear will jump from A1 to A6 with alle Scanias. !!
Drive with Cargo is the same , if with Handbrake , but without just sometimes , but still Stupid , isn't like in 1.36 Before !!!

Temorary Fix : Disable the Adaptive Automatic Transmission under Controls Options !

Tested in Version : 1.38.82s !

Please fix this issue SCS. !!!
scaniadriver01
Posts: 320
Joined: 18 Apr 2020 22:34

Re: automatic gearbox new Scania S730 [117149]

#10 Post by scaniadriver01 » 19 Jun 2020 20:43

this problem has been put on the 1.37 bugs forum before.. but i think people missed it..
viewtopic.php?f=272&t=284328
Post Reply

Return to “Bugs 1.37”

Who is online

Users browsing this forum: No registered users and 4 guests