[REL][1.47][1.7]SCS Flatbed B-Double

howey · #21 Post by **howey** » 13 Apr 2021 12:34

Appreciate you updating this to suit Iberia Carl as this mod is a must have for me. But i just tried it out and the load is just showing on the rear trailer now and not both like before?

Also another thing i have notice with this mod for awhile now is the tare weight is quite high for the style of trailer it is, i always choose a 3+3 configuration and it tares at nearly 15T which is nearly the same tare weight as the SCS refrigerated b-doubles. Because of this extra tare weight it impacts some of the cargo weights back to either the next desired value i would assume SCS has coded or it goes back to the same weights as a single trailer so the question i ask is if you could somehow if possible change the tare weight around what i would think would be the proper tare of this combo to either around the 11-12T range? If not i understand but just thought you would ask the question anyway.

Edit: correction i just tried by tester profile and load is showing of both trailers so it must be the profile on.

xXCARL1992Xx · #22 Post by **xXCARL1992Xx** » 13 Apr 2021 15:41

@howey i took a look at the def files and yes, the trailer are heavy, dont know what calculations i did there

i rebalanced them and now they should be the same weight roughly as the double flatbeds from SCS

howey · #23 Post by **howey** » 16 Apr 2021 09:40

@xXCARL1992Xx I tried the trailer's again and now it's spot on with the tare weight. I can have the same potential hauling as the SCS double's weight wise now which is all I wanted so I appreciate the update.

Antoniopua · #24 Post by **Antoniopua** » 16 Apr 2021 21:39

Beautiful. Thank you!!!

xXCARL1992Xx · #25 Post by **xXCARL1992Xx** » 18 Jul 2021 17:10

because of the changes SCS made in 1.41 to trailer accessories location and some def files the mod is now updated to V 1.3 and it should work error free again and not cause any crash

if bugs are found pls report them

seth_haveron · #26 Post by **seth_haveron** » 31 Jul 2021 22:36

the weights for the 1-axle flatbed seems a bit to high ...

regular trailers got 23 tons distributed to 3 axels ... thats like 7,5 tons each

on the other hand the single axle had to lift 18 tons.... thats a bit more then 2 axels , and only slightly less then regular ...

xXCARL1992Xx · #27 Post by **xXCARL1992Xx** » 01 Aug 2021 07:59

not really, single axle trailer with a gross weight of 22t exist

the only thing i can do is lower it a bit so it never goes over 20t

xXCARL1992Xx · #28 Post by **xXCARL1992Xx** » 09 Dec 2021 17:21

updated for 1.43 where the axle configuration was rewritten

seth_haveron · #29 Post by **seth_haveron** » 09 Dec 2021 19:31

still one of my favorite trailer mods ^^

zebulon · #30 Post by **zebulon** » 09 Dec 2021 20:58

thks a lot

SCS Software

[REL][1.47][1.7]SCS Flatbed B-Double

Re: SCS Flatbed B-Double

Re: SCS Flatbed B-Double

Re: SCS Flatbed B-Double

Re: SCS Flatbed B-Double

Re: [REL][1.41][1.3]SCS Flatbed B-Double

Re: [REL][1.41][1.3]SCS Flatbed B-Double

Re: [REL][1.41][1.3]SCS Flatbed B-Double

Re: [REL][1.41][1.3]SCS Flatbed B-Double

Re: [REL][1.41][1.3]SCS Flatbed B-Double

Re: [REL][1.41][1.3]SCS Flatbed B-Double

Who is online