Page 34 of 37

Re: [ADDON KRONE DLC REQUIRED]Reworked Krone ProfiLiner by Sogard3[v1.3][1.36&1.37][05-06-20]

Posted: 15 Jun 2020 14:18
by King Leo
@Sogard3
An image with appropriate instruments would be sufficient, which is placed on the texture. I couldn't find the texture of the forklift, otherwise I would have tried that myself. It's enough if it's a visual effect. It doesn't have to have functions or a 3D effect. You can also achieve this graphically.

Image

Something like that. I quickly made this. It's a Moffet board, but I couldn't find anything better.
But the community is certainly big enough that someone could even take original photos of the details of a Palfinger.

Super nice

Posted: 19 Jun 2020 14:46
by Chrispikaan
Super nice mod! Thank's for sharing this with the community :)

Maybe you could add a chassis with two axles, but the rear axle is a steering axle en de front axle a lift axle. I see this realy often in real life.

Re: [ADDON KRONE DLC REQUIRED]Reworked Krone ProfiLiner by Sogard3[v1.3][1.36&1.37][05-06-20]

Posted: 19 Jun 2020 16:04
by Sogard3
@Chrispikaan

Not on a regular ProfiLiner body, maybe on a city liner but Im not planing to make it anyway.

Re: [ADDON KRONE DLC REQUIRED]Reworked Krone ProfiLiner by Sogard3[v1.3][1.36&1.37][05-06-20]

Posted: 20 Jun 2020 11:38
by Powerwolf

Re: [ADDON KRONE DLC REQUIRED]Reworked Krone ProfiLiner by Sogard3[v1.3][1.36&1.37][05-06-20]

Posted: 20 Jun 2020 12:54
by Sogard3
@Powerwolf

Thanks for pic :), but the steer system on that one is way different from the one for the mitnahmestapler chassis, it's like a dolly but on the rear part of the trailer. I can't do that.

Re: [ADDON KRONE DLC REQUIRED]Reworked Krone ProfiLiner by Sogard3[v1.3][1.36&1.37][05-06-20]

Posted: 21 Jun 2020 00:46
by m1keY
@King Leo
@Sogard3

I used B.E.M to check the forkliftmodel, and then saw what the spot looked like ...
and it was on the vehicle\trailer_owned\upgrade\palfinger\krone_profiliner_s3\ao_palfinger.dds

could probably be skinned in some other way than directly onto the ao_ but I have no kowledge about that so this is what it looks like...using the texture/image provided :lol:
flipped,mirrored...one have to find out how to put it correctly :P

btw @Sogard3 same folder.. ao_krone2.dds , mine is Obyte -size :?: :!: :?

Image


did find on an auctionsite...
palfinger-crayler-f3-253gt
ImageImage Image

Re: [ADDON KRONE DLC REQUIRED]Reworked Krone ProfiLiner by Sogard3[v1.3][1.36&1.37][05-06-20]

Posted: 21 Jun 2020 11:06
by Sogard3
@m1keY

Probably I put it there by mistake :lol:

Re: [ADDON KRONE DLC REQUIRED]Reworked Krone ProfiLiner by Sogard3[v1.3][1.36&1.37][05-06-20]

Posted: 21 Jun 2020 14:13
by The real Viking
It might be time to remove Krone from being approved mods in SCS. This is not the first time that these trailers do not work 100%. In ETS2 1.37 Orange wheels seem to be a signal for these. Tragic that a courage you pay for should be like this !!! Obviously, the person responsible is only looking for money, not having a well-functioning mod.

https://steamcommunity.com/profiles/765 ... 9363/home/

Re: [ADDON KRONE DLC REQUIRED]Reworked Krone ProfiLiner by Sogard3[v1.3][1.36&1.37][05-06-20]

Posted: 21 Jun 2020 14:15
by xXCARL1992Xx
there are no "appoved mods" from SCS

and the link is a dead end

Re: [ADDON KRONE DLC REQUIRED]Reworked Krone ProfiLiner by Sogard3[v1.3][1.36&1.37][05-06-20]

Posted: 21 Jun 2020 14:19
by Sogard3
@The real Viking

What?