[REL/WIP] Arnook's Container Pack (V17 - 1.49 - 05/03/2024)
Re: [REL/WIP] Arnook's SCS Containers Skin Project (V9.1 - 1.41 - 15/07/2021)
Nice 45ft reefer
However the door is not real... and scs base reefer container door too
https://www.hmm21.com/cms/company/engn/ ... G_8748.JPG
However the door is not real... and scs base reefer container door too
https://www.hmm21.com/cms/company/engn/ ... G_8748.JPG
Re: [REL/WIP] Arnook's SCS Containers Skin Project (V9.1 - 1.41 - 15/07/2021)
Fantastic work once again @JUseeTV can't wait to skin these !
@jujun48 no, we will make two variants with external refrigeration units as mentioned above. The reason for that is that the 40ft reefer already has an integrated unit and we want to provide variation in this pack. Also the external units are quite common for this type of container.
@KueTae We are aware of that, as mentioned, it is still a WIP so there are more changes/improvements to come.
Also, the doors you showed aren't correct for a 45ft reefer. They are from a 40ft HC reefer. The 45ft ones are slightly different.
@jujun48 no, we will make two variants with external refrigeration units as mentioned above. The reason for that is that the 40ft reefer already has an integrated unit and we want to provide variation in this pack. Also the external units are quite common for this type of container.
@KueTae We are aware of that, as mentioned, it is still a WIP so there are more changes/improvements to come.
Also, the doors you showed aren't correct for a 45ft reefer. They are from a 40ft HC reefer. The 45ft ones are slightly different.
Re: [REL/WIP] Arnook's SCS Containers Skin Project (V9.1 - 1.41 - 15/07/2021)
@Arnook Thanks for my question, actually I've never seen it
[REL/WIP] Arnook's SCS Containers Skin Project (V9.1 - 1.41 - 15/07/2021)
@JUseeTV wauw that looks very nice looks pretty different than the most containers i see
- TheRanger2604
- Posts: 66
- Joined: 31 Mar 2021 14:34
- Location: Dachau
- Contact:
Re: [REL/WIP] Arnook's SCS Containers Skin Project (V9.1 - 1.41 - 15/07/2021)
If I may ask...:
1) Are you planning to implement more different cargoes for the Flatrack container? In my opinion there's quite a lack of them (Only the Honka Wood, The Liebherr Cabins and the Linde Forklifts). I know that this would make it neccessary to either create completely new 3d-Models or edit the standardized ones what means that it will be quite a lot work to do.
But it would be nice to see some of the SCS Base Freights also on those flatbed racks too (i.e. Basegame Forklifts, the train axles+bogies, pallets of different stuff etc)
2) Is is possible to modify/add a flexible 45ft-Chassis so that it can haul also 20ft/2x20/40ft Containers like the Basegame - Containertrailer does?
It's a great mod anyways, really high-graded work. These are just some suggestions to maybe even increase the possibilities ^^
Thanks a lot
1) Are you planning to implement more different cargoes for the Flatrack container? In my opinion there's quite a lack of them (Only the Honka Wood, The Liebherr Cabins and the Linde Forklifts). I know that this would make it neccessary to either create completely new 3d-Models or edit the standardized ones what means that it will be quite a lot work to do.
But it would be nice to see some of the SCS Base Freights also on those flatbed racks too (i.e. Basegame Forklifts, the train axles+bogies, pallets of different stuff etc)
2) Is is possible to modify/add a flexible 45ft-Chassis so that it can haul also 20ft/2x20/40ft Containers like the Basegame - Containertrailer does?
It's a great mod anyways, really high-graded work. These are just some suggestions to maybe even increase the possibilities ^^
Thanks a lot
Re: [REL/WIP] Arnook's SCS Containers Skin Project (V9.1 - 1.41 - 15/07/2021)
@schulzkr2604
Regarding point 1: Arnook and I made the decision to not use any SCS cargo for the flatracks to add diversity. Otherwise I could have used the SCS forklifts aswell. Also to maintain a certain level of quality we use exclusively our own models that are tailored to our specific needs. In total there are 30 different combinations for the flatracks, so there is quite much diversity already.
Regarding point 2: This has been changed now, with the next version it will be adjustable.
Anyways glad that you enjoy our work.
Regarding point 1: Arnook and I made the decision to not use any SCS cargo for the flatracks to add diversity. Otherwise I could have used the SCS forklifts aswell. Also to maintain a certain level of quality we use exclusively our own models that are tailored to our specific needs. In total there are 30 different combinations for the flatracks, so there is quite much diversity already.
Regarding point 2: This has been changed now, with the next version it will be adjustable.
Anyways glad that you enjoy our work.
Last edited by JUseeTV on 31 Jul 2021 13:25, edited 1 time in total.
I am not giving any sort of support, requests or Q&A through private messages, such messages will be ignored. Please use the appropriate topics, they are there for a reason.
- xXCARL1992Xx
- Posts: 16461
- Joined: 17 Aug 2016 12:18
- Contact:
Re: [REL/WIP] Arnook's SCS Containers Skin Project (V9.1 - 1.41 - 15/07/2021)
the Boxliner can do it, i did it myself, also the SCS flex trailer can also do it, i looked at Fliegl and they have almost the same and they dont have under run protection at the back, so the chassis only extends to the second to last hook point, or you can extend the chassis the whole 45ft, this also exists from Fliegl
page 5 shows some comparison
https://www.fliegl-fahrzeugbau.de/files ... _LoRes.pdf
page 5 shows some comparison
https://www.fliegl-fahrzeugbau.de/files ... _LoRes.pdf
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
[ external image ]
- TheRanger2604
- Posts: 66
- Joined: 31 Mar 2021 14:34
- Location: Dachau
- Contact:
Re: [REL/WIP] Arnook's SCS Containers Skin Project (V9.1 - 1.41 - 15/07/2021)
Thanks for the quick reply @JUseeTV The announcement of the flexible 45ft chassis made my day. Looking forward to it!
Alright no worries, just would've been a cool thing to see other freights. But I totally understand your point, and yes due to all of the paintjobs on the flatrack it's definitely a wide variety of possibilities
And yes - I'm definitely enjoying your mod
[ external image ]
Alright no worries, just would've been a cool thing to see other freights. But I totally understand your point, and yes due to all of the paintjobs on the flatrack it's definitely a wide variety of possibilities
And yes - I'm definitely enjoying your mod
[ external image ]
Re: [REL/WIP] Arnook's SCS Containers Skin Project (V9.1 - 1.41 - 15/07/2021)
One more feature that will be added in V10 is this one :
45ft B-Double configuration :
[ external image ]
[ external image ]
[ external image ]
Both 45ft chassis will be compatible with Kast's VAK V-Slider.
This will be released in the form of add-on to V10 of the mod, since the VAK trailer mod (plus the VAK/Krone add-on) will both be mandatory.
Thanks to Prutser for the def work for this configuration and to Kast for his permission to release it in the future.
Skinning work on the 45ft reefer just started. I will start showing pictures soon as I usually do.
45ft B-Double configuration :
[ external image ]
[ external image ]
[ external image ]
Both 45ft chassis will be compatible with Kast's VAK V-Slider.
This will be released in the form of add-on to V10 of the mod, since the VAK trailer mod (plus the VAK/Krone add-on) will both be mandatory.
Thanks to Prutser for the def work for this configuration and to Kast for his permission to release it in the future.
Skinning work on the 45ft reefer just started. I will start showing pictures soon as I usually do.
Who is online
Users browsing this forum: No registered users and 6 guests