xXCARL1992Xx Screens & Blender work

User avatar
Anna K
Posts: 3478
Joined: 20 Aug 2016 04:58
Location: ᛘᛁᚦᚴᛅᚱᚦᛦ
Contact:

Re: xXCARL1992Xx Screens & Blender work

#1101 Post by Anna K » 22 Nov 2020 04:43

You make me wanna port a truck to ETS2 but I haven't a clue how, last time I tried it didn't show up in mod dealer even tho I did the files - I guess I must've done things wrong.
You think you'd make custom EU-reg rear fenders that somewhat include the flow below kit? Or is that a big no-no in trucking world?

Awesome stuff tho!
🇱🇮
User avatar
xXCARL1992Xx
Posts: 16527
Joined: 17 Aug 2016 12:18
Contact:

Re: xXCARL1992Xx Screens & Blender work

#1102 Post by xXCARL1992Xx » 22 Nov 2020 08:57

porting from ATS to ETS is pretty easy, almost all data is already included in the dlc, just some minor stuff like icons or the roof lights are not included, you can either remove the defs or port the models over, the big problem are the hood mirrors but i have figured this one out also and written it down in a thread

regarding the flow below, maybe with closed fender it isnt really needed anymore, but i cant mount it that way for sure, either i cut out the fender so it fits like i did for the axle mount or i modify the kit so heavily that it fits again :grin:
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
User avatar
B787
Posts: 3308
Joined: 10 Aug 2017 17:08
Location: Germany

Re: xXCARL1992Xx Screens & Blender work

#1103 Post by B787 » 22 Nov 2020 09:17

Not quite sure but I would remove the kit for Europe as I would fear it could damage the trailer. :?
User avatar
xXCARL1992Xx
Posts: 16527
Joined: 17 Aug 2016 12:18
Contact:

Re: xXCARL1992Xx Screens & Blender work

#1104 Post by xXCARL1992Xx » 22 Nov 2020 11:39

@B787 it would be the other way around, the trailer would rip off the back fin without breaking a sweat :rofl: i had it one and i saw no collision with it with the Boxliner at least, im still debating if i make a shorter box trailer for the truck but for this i need to know the length of the truck and then see if Krone has a short one that would fall in the 17.75m regulation or i just shorten SCS box trailer to fit right in
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
User avatar
B787
Posts: 3308
Joined: 10 Aug 2017 17:08
Location: Germany

Re: xXCARL1992Xx Screens & Blender work

#1105 Post by B787 » 22 Nov 2020 12:15

:lol: :lol: :lol:

I don't know. On friday I saw a Profi Liner which was much lower than the "normal" ones... looked very odd. :?
I'm also already thinking about which trailer I'll use to give the Cascadia a go in ETS2 - most probably a short container trailer. :? Or just break the law. :mrgeeen:
User avatar
xXCARL1992Xx
Posts: 16527
Joined: 17 Aug 2016 12:18
Contact:

Re: xXCARL1992Xx Screens & Blender work

#1106 Post by xXCARL1992Xx » 23 Nov 2020 11:48

container carrying it is then, with permits for one or the other 40 or even maybe 45ft container :grin:

[ external image ]
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
User avatar
xXCARL1992Xx
Posts: 16527
Joined: 17 Aug 2016 12:18
Contact:

Re: xXCARL1992Xx Screens & Blender work

#1107 Post by xXCARL1992Xx » 24 Nov 2020 16:37

:thinking:
[ external image ]
better picture then the poop render up top :rofl:

[ external image ] [ external image ]
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
User avatar
abasstreppas
Posts: 7492
Joined: 06 Feb 2013 20:32
Location: Back on Öland again
Contact:

Re: xXCARL1992Xx Screens & Blender work

#1108 Post by abasstreppas » 24 Nov 2020 23:09

Nice, but I think the welding string should be a bit wider, close to double the size if that material is stainless and if it's aluminium the width should be like triple ;)
User avatar
xXCARL1992Xx
Posts: 16527
Joined: 17 Aug 2016 12:18
Contact:

Re: xXCARL1992Xx Screens & Blender work

#1109 Post by xXCARL1992Xx » 24 Nov 2020 23:16

its 6mm wide (wich isnt the factor really, here it is how "deep" it is what says if it will hold), TIG welded, MIG/MAG wouldnt result in such a top notch weld, definitely not when i do it :rofl:
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
User avatar
abasstreppas
Posts: 7492
Joined: 06 Feb 2013 20:32
Location: Back on Öland again
Contact:

Re: xXCARL1992Xx Screens & Blender work

#1110 Post by abasstreppas » 25 Nov 2020 00:37

I was very good at it once upon a time and that was between 1982-1987, so it's probably redundant now :lol:

Are you sure it's 6 mm? It look so tiny compared to that 70 mm tube (or is it bigger than that?)
Post Reply

Return to “Screenshots”

Who is online

Users browsing this forum: No registered users and 7 guests