xXCARL1992Xx Screens & Blender work
Re: xXCARL1992Xx Screens & Blender work
Yep, and I'll let you guess what the susp load gauge reads
Here's a pic of all the gauges. (Battery gauge doesn't seem to be a thing)
Here's a pic of all the gauges. (Battery gauge doesn't seem to be a thing)
- xXCARL1992Xx
- Posts: 16462
- Joined: 17 Aug 2016 12:18
- Contact:
Re: xXCARL1992Xx Screens & Blender work
i assume it is the first one under the radio because it has the biggest range (0 to 120psi) and the other 2 are the same i also have (application and trailer air)
the other ones are hard to see but it is trubo, oil and trans, under it is 2x axle
the other ones are hard to see but it is trubo, oil and trans, under it is 2x axle
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
[ external image ]
Re: xXCARL1992Xx Screens & Blender work
That's the one, and those 2 are front and rear axle temps.
- xXCARL1992Xx
- Posts: 16462
- Joined: 17 Aug 2016 12:18
- Contact:
Re: xXCARL1992Xx Screens & Blender work
now i have done it, used your number for max load and loaded a 43t trailer, it shows me 58PSI, but i dont know if it is right or not, same goes for the keyframes i did
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
[ external image ]
- supersobes
- Global moderator
- Posts: 13714
- Joined: 07 Dec 2016 21:53
- Location: Northern Virginia, USA
- Contact:
Re: xXCARL1992Xx Screens & Blender work
The gauges look really good! I love the way that looks!
One suggestion if you want to make it more realistic, I would suggest changing the "trailer load" gauge to "suspension load" and have it read in PSI. IRL, the gauge measures the suspension air pressure to give the driver an idea of how much weight is pushing down on the truck. This gauge pictured below is out of a Kenworth rather than a Western Star, but you get the idea.
[ external image ]
One suggestion if you want to make it more realistic, I would suggest changing the "trailer load" gauge to "suspension load" and have it read in PSI. IRL, the gauge measures the suspension air pressure to give the driver an idea of how much weight is pushing down on the truck. This gauge pictured below is out of a Kenworth rather than a Western Star, but you get the idea.
[ external image ]
- xXCARL1992Xx
- Posts: 16462
- Joined: 17 Aug 2016 12:18
- Contact:
Re: xXCARL1992Xx Screens & Blender work
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
[ external image ]
- xXCARL1992Xx
- Posts: 16462
- Joined: 17 Aug 2016 12:18
- Contact:
Re: xXCARL1992Xx Screens & Blender work
well, a 43t trailer is attached, if this is right or not i will never know until SCS decides to add this gauge (there is a def entry but not animation files for it)
[ external image ]
strangely on the W900 and the 389 there is such a gauge but it is linear from 0 to 150, and it also uses 0 as minimum and 150000 as maximum in the def files, so what does the game use now ? internally it will be newton for sure but then the scales dont match up ?
and i still dont know how to get rid of the glare on the GPS even though it already uses same settings as SCS GPS accessories
[ external image ]
strangely on the W900 and the 389 there is such a gauge but it is linear from 0 to 150, and it also uses 0 as minimum and 150000 as maximum in the def files, so what does the game use now ? internally it will be newton for sure but then the scales dont match up ?
and i still dont know how to get rid of the glare on the GPS even though it already uses same settings as SCS GPS accessories
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
[ external image ]
- xXCARL1992Xx
- Posts: 16462
- Joined: 17 Aug 2016 12:18
- Contact:
Re: xXCARL1992Xx Screens & Blender work
bit of detail work, after i saw some pictures of the interior the "screws" startet to bug me
[ external image ]
[ external image ]
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
[ external image ]
- xXCARL1992Xx
- Posts: 16462
- Joined: 17 Aug 2016 12:18
- Contact:
Re: xXCARL1992Xx Screens & Blender work
aaaand another round, i got help on figuring out the non linear animation and i did some math to get the Kn to PSI correct (120PSI are a bit over 820Kn) so the only thing i dont know is if the value shown is correct
[ external image ]
[ external image ]
[ external image ]
[ external image ]
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
[ external image ]
- xXCARL1992Xx
- Posts: 16462
- Joined: 17 Aug 2016 12:18
- Contact:
Re: xXCARL1992Xx Screens & Blender work
i bet there is something wrong somewhere in all this number crunching but i dont care, was a long time ago i had to do something like this but from this im almost close to it, i took a load of 17t in ATS and looked what the gauge showed me, it was somewhere around 20PSI so 31PSI is what i "calculated" to the best of my ability
[ external image ]
@FierbetoN looks like my 823k N in the animation files is almost right (120PSI coverted to N)
[ external image ]
@FierbetoN looks like my 823k N in the animation files is almost right (120PSI coverted to N)
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
[ external image ]
Who is online
Users browsing this forum: No registered users and 10 guests