W4X Customs 🛠
Re: W214D's Stories and Blender Screens
It’s about damn time as well
--------------------------------------------------------------------------
Since both the R and T cab are almost finished, I’m going to continue working on the 3-series for a short period of time. I then will add the P-cab eventually to both lineups.
[ external image ]
Now I have reworked the reflections, dashboard, and added the missing 6x variants
[ external image ]
[ external image ]
The R 3-series came with 2 offering for the headlights, one was similar to its predecessor and one was brand new. I have made both an option, although there’s still work to be done
[ external image ]
Just doing some general testing outside the garage. So far so good!
[ external image ]
Here’s the beginning of the interior
--------------------------------------------------------------------------
Since both the R and T cab are almost finished, I’m going to continue working on the 3-series for a short period of time. I then will add the P-cab eventually to both lineups.
[ external image ]
Now I have reworked the reflections, dashboard, and added the missing 6x variants
[ external image ]
[ external image ]
The R 3-series came with 2 offering for the headlights, one was similar to its predecessor and one was brand new. I have made both an option, although there’s still work to be done
[ external image ]
Just doing some general testing outside the garage. So far so good!
[ external image ]
Here’s the beginning of the interior
Last edited by W4X on 11 Jul 2023 12:22, edited 3 times in total.
Re: W214D's Stories and Blender Screens
Love your work!
How is the 2 series interior?
How is the 2 series interior?
Greetings oet Grunn!
World of Trucks
World of Trucks
Re: W214D's Stories and Blender Screens
Thanks! <3
I currently don’t have a picture of the entire interior, but I do have one for the dash:
[ external image ]
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Got our first Feldbinder Silo into the Main HQ in Leipzig, giving it's first test run in Frankfurt heading to Finland
[ external image ]
I currently don’t have a picture of the entire interior, but I do have one for the dash:
[ external image ]
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Got our first Feldbinder Silo into the Main HQ in Leipzig, giving it's first test run in Frankfurt heading to Finland
[ external image ]
Last edited by W4X on 11 Jul 2023 12:23, edited 1 time in total.
Re: W214D's Stories and Blender Screens
Woow!! Your T 2 series, your R cab series are so niiice!
And nice 3 series too (with the Topline Roof).
Didn't know 2 headlight potisions option were available, nice detail!
About the interior! yeaaah, an accurate one, at least!
Great job! hats off!
And nice 3 series too (with the Topline Roof).
Didn't know 2 headlight potisions option were available, nice detail!
About the interior! yeaaah, an accurate one, at least!
Great job! hats off!
French virtual trucker - Great fan of Scania, and also fan of 90's/2000 "classic"trucks
Finaly enjoying ATS as much as ETS2
Starting from "zero" again in 1.49...
Finaly enjoying ATS as much as ETS2
Starting from "zero" again in 1.49...
Re: W214D's Stories and Blender Screens
Thanks mate!
The 2 Series Headlight position on the 3 Series was mainly P Cabs and some flat roof R Cabs (Topline occasionally on some 143E's)
The 2 Series Headlight position on the 3 Series was mainly P Cabs and some flat roof R Cabs (Topline occasionally on some 143E's)
Re: W214D's Stories and Blender Screens
Nice work you are doing there
I am not giving any sort of support, requests or Q&A through private messages, such messages will be ignored. Please use the appropriate topics, they are there for a reason.
Re: W214D's Stories and Blender Screens
Thanks! <3
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
So I’ve returned back to the 2-series.
[ external image ]
[ external image ]
[ external image ]
[ external image ]
I have finally added the missing wind deflectors on the front, available in both the early and later front ends and is offered in both paint and plastic.
[ external image ]
I have also added the missing engine tunnel in the R cab interiors, still needs some work
[ external image ]
[ external image ]
Seeing as I’ve recently added the 5-holed old Alcoa, I decided to add the 11-inch variant which was seen on some trucks during the 80s-2000s
Credits to a good friend helping with the holes, this model is based on 50k's Alcoa but designed how it was in the 80s and 90s:
[ external image ]
--------------------------------------------------------------------------------------------------------------------------------------------------------------------
So I’ve returned back to the 2-series.
[ external image ]
[ external image ]
[ external image ]
[ external image ]
I have finally added the missing wind deflectors on the front, available in both the early and later front ends and is offered in both paint and plastic.
[ external image ]
I have also added the missing engine tunnel in the R cab interiors, still needs some work
[ external image ]
[ external image ]
Seeing as I’ve recently added the 5-holed old Alcoa, I decided to add the 11-inch variant which was seen on some trucks during the 80s-2000s
Credits to a good friend helping with the holes, this model is based on 50k's Alcoa but designed how it was in the 80s and 90s:
[ external image ]
Last edited by W4X on 01 Nov 2023 02:23, edited 3 times in total.
Who is online
Users browsing this forum: No registered users and 8 guests