White screen while driving

[Vasi]

Hello

After a few tens of minutes of driving, the game freezes for a while and screen turns to white. It looks like everything works, i can still drive i hear sounds like truck continues, but i can't see anything, just white screen.

Game log: https://pastebin.com/A9ZtjQnh
Computer spec:
Windows 10
Intel core i5 2400, 8GB RAM, Graphic card ATI Radeon R9 270X 2GB, Graphic drivers are up to date

I had this problems about half a year or a year before, i tried disable all mods, create new game profile and reainstal the game. Since then it was untouched. Now I instal the game again and I have same problems. I hoped some updates corrected this.

Thank you for your help

[Vasi]

Today's game log: https://pastebin.com/Zzr0qRpj

[Siperia]

Is your load order correct for those map mods?

Also, do you have the most recent drivers for everything?

[Todor Alin]

The problem, most likely is here:

Code: Select all

00:00:00.000 : [sys] running on x86 / Windows 10 x64 (version 10.0)

Just run the 64 version of the game....

[Vasi]

So I tried to run x64 version, and i had white screen again: https://pastebin.com/ZrXbNT5r

I assured myself before that the problem is not caused by mods, vanilla game caused this problem too.
In actual installation I am using only Promods and Rusmap.

I think, the problem is here:

Code: Select all

<ERROR> [dx9] Present failed. [0x88760868]

So i googled a little and found this:
https://steamcommunity.com/app/270880/d ... 336151676/
He says that the game engine is obsolete, so the obsolete drivers should be used with WDDM 1.3. But I don't know how to recognize witch catalist version uses WDDM1.3. Moreover I'm not inclined to use obsolote drivers and I assume most of you are not using obsolete drivers. I don't know, may be my graphic card is not appropriate. Is anyone who uses ATI Radeon R9 270x without problems?

[Todor Alin]

I have 17.5.2 version of amd drivers, and I have no problems, but I have Windows 7 64
It's posible that could be a problem with Windows 10 drivers.
From the forum you mentioned, this driver could work. Download from here. Uninstall complete your existing version, and try this 8.1 driver. Hope will work.

[Vasi]

Fuu... unable to install win 8.1 drivers . I tried version 17.6.2 and 17.4.4 both with this error: https://prnt.sc/fr3m6a
So i downloaded and install 17.4.4 for windows 10 64bit.

Doublepost merged.

I drove for almost two hours. I thought I found a solution. It's just graphic drivers reinstalation, but... NO. White screen again: https://pastebin.com/U73Vatzh
I don't know... May be I should play something else?

Update: I tried to instal DX9.0c from here: https://www.microsoft.com/en-us/downloa ... px?id=8109 but problem was not solved: https://pastebin.com/vrL6e016

[Vasi]

Hello, I have a new updates. I have contacted scs support with my problem and they reccomends me to disable any software, that might attempt to overlay elements over the game and any recording software. But I am not using any recording software nor any overlay software except steam client.

Than I read about this problem on some german forum http://trucksimulator24.de/index.php?pa ... post186195 . So I tried to play in fullscreen mode and I have no problem since then. For me it is a partial solution, because I dont like fullscreen mode. Is someone, who plays in windowed mode without problem?

[ohaha]

I play with windowed mode and have no issues.
Windows 10 has something called gam mode or something... It shows that message about pressing Windows key + G etc. Maybe there's some settings there.

[pattoman]

I am the one who wrote the post about the WDDM 1.3.x on the ETS2 steam discussion board. http://steamcommunity.com/app/270880/di ... 336151676/

And yes, the ONLY way I can play ETS2 or ATS crash-free on my Windows 10 machine is by downgrading to a Windows 8.1 display driver.