ETS2 Crashing

[CuzImMaximus]

Good evening.
My game is crashing with this message:
00:04:39.210 : <ERROR> d:\buildbot\slaves\win_slave\final_build_ets2_138_windows_bin_steam_x64\build\prism\src\p3core\collections\arrays\arrays_base_impl.h(491): ??A?$array_t@Ur_buffer_segment_t@prism@@@prism@@QEAAAEAUr_buffer_segment_t@1@_K@Z: Index outside array boundaries.

Here is also the two logs
The first Log:https://pastebin.com/U7xSQCsz
The second log:https://pastebin.com/jjUt0gF7

[plykkegaard]

Get your mods sorted
Drop mods not suitable for your game version
Your game log is shattered with a huge amount of errors and warnings

[CuzImMaximus]

I have removed mods which not updatet for 1.38.
I have removed mods which throw warnings and errors.
The game is still crashing with the same error in the start post.
https://pastebin.com/JuyrSeV1

[Mohegan13]

Still a ton of errors from mods. But your issue appears to be running out of memory.

[CuzImMaximus]

Graphic memory or normal memory?
Graphic memory is 4gb
Normal memory is 12gb

[Madkine]

As you can see in the last few lines of the log file you posted, gfx memory is depleted.

In that log you still have a number of mods that aren't updated for 1.38. A number of those require conversions which seem to eat graphics memory.
One of them looks to be a 50k pack.

[The Old Fart]

@CuzImMaximus, your graphics memory may be being depleted by large textures in your mod / or many big textures being run at once. To help manage this situation, and to get better performance in ETS2 (particularly if you are running a lot of traffic AI mods) you might want to look at the following thread and discussion: "Hi-End Configuration Optimization" at: viewtopic.php?f=41&t=261451

Just go to the first page and follow the instructions for 'startup parameters'. You should get better performance and even more FPS.

However; as everyone has noted, you really do need to disable outdated mods or those which are causing errors.

[Some newbie driver]

And even using the advanced startup parameters, there's no single of those that will prevent the VGA to run out of memory if he loads too much on it; mostly due wrong mods that who knows how could behave internally when running on non-supported versions.

[The Old Fart]

Exactly right Some newbie driver - he need to sort out the bad mods, then the startup parameters can be helpful.

[mstfcbngl]

If still experiencing the same problem I guess I found the solution, at least after what I've done I didn't see this error so far. I changed the "0" to "1" in line uset r_full_resolution_corrections "0" in config file in documents.