FFB G29 very bad
-
- Posts: 1
- Joined: 25 Oct 2021 18:00
FFB G29 very bad
Good evening.
I am using a G29 and the truth is that it does not go well for me like the rest of the people. I have tried different types of FFB configuration and nothing, when it returns from a turn it is difficult and it goes like stumbling blocks. I have managed to leave it at the point that it is not bad at all but there is no good feeling. I hope they solve it because it was a pleasure to drive with the configuration that had until 1.41
I am using a G29 and the truth is that it does not go well for me like the rest of the people. I have tried different types of FFB configuration and nothing, when it returns from a turn it is difficult and it goes like stumbling blocks. I have managed to leave it at the point that it is not bad at all but there is no good feeling. I hope they solve it because it was a pleasure to drive with the configuration that had until 1.41
-
- Posts: 2
- Joined: 28 Oct 2021 20:14
Re: FFB G29 very bad
Hi
Yes i'm the same my G29 is terrible now, i've messed about with the settings & can't get anything i like
Would love if they could add an option for us to move to the old settings too as there seems to be a few who liked them
Yes i'm the same my G29 is terrible now, i've messed about with the settings & can't get anything i like
Would love if they could add an option for us to move to the old settings too as there seems to be a few who liked them
Re: FFB G29 very bad
I just have the same issue with my Logitech G29. I already tried set up everything again, but cannot fix this issue. THX SCS Software, you really made a good test before release this last update...
-
- Posts: 10
- Joined: 15 May 2020 15:34
Re: FFB G29 very bad
I have the G920 and facing the exact same issue. I think I am going to be downgrading to 1.41 until there is a fix for it.
Re: FFB G29 very bad
Sorry for you, guys, that you've got such huge problems with your G29!
Okay, I also was initially surprised about the rough behavior of the new FFB system with my G29. But after several tries with the settings, I'm now very satisfied with it! For me, it's even better than before.
Never had thought that I'd write something like that since I otherwise am rather critical with patch innovations...
Okay, I also was initially surprised about the rough behavior of the new FFB system with my G29. But after several tries with the settings, I'm now very satisfied with it! For me, it's even better than before.
Never had thought that I'd write something like that since I otherwise am rather critical with patch innovations...
- Eduard_Kenobi
- Posts: 338
- Joined: 24 May 2015 21:34
- Location: Slovakia, Prešov
- Contact:
Re: FFB G29 very bad
I have a G29 and have same problem. During reversing when I turned full to left (or right) and want to go forward again, set gear to 2, go ahead and in same time turning to other side I am getting strong force feedback, like there is block in joint of suspension.
Hello there!
List of releases [ETS2]
List of releases [ATS]
World of Trucks profile
https://www.worldoftrucks.com/en/profile/15093
List of releases [ETS2]
List of releases [ATS]
World of Trucks profile
https://www.worldoftrucks.com/en/profile/15093
-
- Posts: 2
- Joined: 28 Oct 2021 20:14
Re: FFB G29 very bad
Please share your settings with usPengu wrote: ↑31 Oct 2021 10:52 Sorry for you, guys, that you've got such huge problems with your G29!
Okay, I also was initially surprised about the rough behavior of the new FFB system with my G29. But after several tries with the settings, I'm now very satisfied with it! For me, it's even better than before.
Never had thought that I'd write something like that since I otherwise am rather critical with patch innovations...
-
- Posts: 2842
- Joined: 23 Oct 2013 21:10
- Location: Between somewhere and somewhere else
Re: FFB G29 very bad
here's mine.
[ external image ]
its not quite so clunky, still has a bit of hold when going forwards to backwards with some lock applied so you have to give it a bit of pursuasion, but its 90% drivable friction any higher it starts to get clunky.
some say its SCS coding, though with plastic gears it could be my cogs being worn, (my wheel is 3 years old after all), or a combination of both, i have not opened it up nor do i intend to.
There is one trick you could do.
switch it from PS4 to PS3. it has some effect, not quite so feedbacky, but not ckunky and there is a little bit of resistance when driving but you're not fighting the wheel. If it is the case that SCS's coding is a tad off, then this may be your answer. It may take SCS a while to dial this one out so until then, switch it to PS3. I dont know what it does or how it does what it does, but it has an effect
[ external image ]
its not quite so clunky, still has a bit of hold when going forwards to backwards with some lock applied so you have to give it a bit of pursuasion, but its 90% drivable friction any higher it starts to get clunky.
some say its SCS coding, though with plastic gears it could be my cogs being worn, (my wheel is 3 years old after all), or a combination of both, i have not opened it up nor do i intend to.
There is one trick you could do.
switch it from PS4 to PS3. it has some effect, not quite so feedbacky, but not ckunky and there is a little bit of resistance when driving but you're not fighting the wheel. If it is the case that SCS's coding is a tad off, then this may be your answer. It may take SCS a while to dial this one out so until then, switch it to PS3. I dont know what it does or how it does what it does, but it has an effect
Re: FFB G29 very bad
Great, just today another update came and they damaged the FFB more
https://youtu.be/47Vc9r0uae0
anyone have this problem with the latest update?
https://youtu.be/47Vc9r0uae0
anyone have this problem with the latest update?
Who is online
Users browsing this forum: No registered users and 12 guests