Rigid Chassis Addon for Eugene's Scania NG by Kast (07.01.21)

User avatar
Henryturu
Posts: 18
Joined: 29 Apr 2016 07:01
Location: Finland
Contact:

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#291 Post by Henryturu » 25 Sep 2020 13:44

@LadenSwallow Ah yes... Massive mod folder because somebody is too lazy to clean it... :D And there's Kast's version at use and Siperia's mod is deleted from use.
Finland Pro Trans driver

TMLM
Posts: 43
Joined: 18 Sep 2020 10:39

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#292 Post by TMLM » 25 Sep 2020 23:26

@kast is there any chance that you could include the Aero Slots and BakBars from the ReMoled mod to this mod? I would very much like to use them both, but when using your mod those accessories do not work, and to get them working I need to disable your mod :/
Sorry for walls of texts, I often can't keep myself short...

User avatar
DrMedDenRasen
Posts: 353
Joined: 20 May 2018 07:19

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#293 Post by DrMedDenRasen » 26 Sep 2020 17:52

Hi @LadenSwallow ,

Try this here :

6x2kast1:
kerb_weight[0]: 8000.1
kerb_weight[1]: 1000.1
kerb_weight[2]: 5000.1

drives so very well
My English is not the yellow from the egg :D

https://www.flickr.com/photos/143031518@N05/

User avatar
longlinerv8
Posts: 239
Joined: 18 Mar 2013 07:38
Location: rotterdam Netherlands
Contact:

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#294 Post by longlinerv8 » 30 Sep 2020 13:10

i get a error on this on version 1.38

00:02:40.943 : <ERROR> [fs] Failed to open file '/vehicle/truck/scania_2016/cabin.pmc' in the read_only mode.
00:02:40.943 : <ERROR> [resource_task] Can not open '/vehicle/truck/scania_2016/cabin.pmc'
00:02:40.943 : <ERROR> [model] Model collision '/vehicle/truck/scania_2016/cabin.pmc' is malformed.
00:02:40.943 : <ERROR> [fs] Failed to open file '/vehicle/truck/scania_2016/cabin.pmd' in the read_only mode.
00:02:40.943 : <ERROR> [resource_task] Can not open '/vehicle/truck/scania_2016/cabin.pmd'
00:02:40.943 : <ERROR> [model] Model descriptor '/vehicle/truck/scania_2016/cabin.pmd' is malformed.
00:02:40.943 : <ERROR> [fs] Failed to open file '/vehicle/truck/scania_2016/cabin.pmg' in the read_only mode.
00:02:40.943 : <ERROR> [resource_task] Can not open '/vehicle/truck/scania_2016/cabin.pmg'
00:02:40.943 : <ERROR> [model] Model geometry '/vehicle/truck/scania_2016/cabin.pmg' is malformed.
00:02:41.645 : <ERROR> [fs] Failed to open file '/vehicle/truck/scania_2016/cabin.pmd' in the read_only mode.
00:02:41.645 : <ERROR> [ld] Failed to open '/vehicle/truck/scania_2016/cabin.pmd'.
00:02:41.645 : <ERROR> d:\buildbot\slaves\win_slave\final_build_ets2_138_windows_bin_steam_x64\build\prism\src\models\model\model_template.cpp(590): ?cache_data_handler@model_template_u@prism@@UEAAXXZ: Failed to load model descriptor (.pmd) or model geometry (.pmg) for '/vehicle/truck/scania_2016/cabin.pmg'.
SCS software is the first world's top trucking game builder EVER!
my world of truckshttps://www.worldoftrucks.com/en/online ... hp?id=5612
Image

Ldee247
Posts: 1
Joined: 03 Jan 2018 17:19

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#295 Post by Ldee247 » 18 Oct 2020 01:17

Hi, guys, my game is crashing can someone share all the prerequisites that are needed for this Rigid Chassis Addon for Eugene's Scania NG by Kast to work. Also, can someone help and possibly share a screenshot layering as to how the Mod manager should be layered with respect to all mods. I have tried putting the MOD above rjl Scania as suggested but still crashing.

Herewith my log: https://pastebin.com/2czGxXFA

Any help I'll greatly appreciate, thanks in advance.

Ldee247

User avatar
m1keY
Posts: 5338
Joined: 18 Oct 2015 22:49
Contact:

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#296 Post by m1keY » 18 Oct 2020 12:46

@Ldee247 any mod that makes changes or use the default SCS trucks will/can cause modconflicts when both or more are enabled in modmanager ....

so if you use Flemming V tandem Pack alongside Eugene's Reworked NG ..you probably get a modconflict as both uses the same truck to modify certain things ...
re-arranging the mods (higher priority) for one could cause different conflicts, however possibly not gamebreaking = crash to desktops ...so best thing is to make multiple profile setups for your favorite trucks.

Ldee247
Posts: 1
Joined: 03 Jan 2018 17:19

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#297 Post by Ldee247 » 19 Oct 2020 21:58

It worked for a second I managed to build a rigid truck using MOD but if I try to visit a Scania dealer or buy online it's crashing to desktop.

00:35:44.271 : <ERROR> [fs] Failed to open file '/vehicle/truck/scania_2016/cabin.pmc' in the read_only mode.
00:35:44.271 : <ERROR> [resource_task] Can not open '/vehicle/truck/scania_2016/cabin.pmc'
00:35:44.271 : <ERROR> [model] Model collision '/vehicle/truck/scania_2016/cabin.pmc' is malformed.
00:35:44.271 : <ERROR> [fs] Failed to open file '/vehicle/truck/scania_2016/cabin.pmd' in the read_only mode.
00:35:44.271 : <ERROR> [resource_task] Can not open '/vehicle/truck/scania_2016/cabin.pmd'
00:35:44.271 : <ERROR> [model] Model descriptor '/vehicle/truck/scania_2016/cabin.pmd' is malformed.
00:35:44.271 : <ERROR> [fs] Failed to open file '/vehicle/truck/scania_2016/cabin.pmg' in the read_only mode.
00:35:44.271 : <ERROR> [resource_task] Can not open '/vehicle/truck/scania_2016/cabin.pmg'
00:35:44.271 : <ERROR> [model] Model geometry '/vehicle/truck/scania_2016/cabin.pmg' is malformed.
00:35:44.272 : <ERROR> [fs] Failed to open file '/vehicle/truck/scania_2016/cabin.pmd' in the read_only mode.
00:35:44.272 : <ERROR> [ld] Failed to open '/vehicle/truck/scania_2016/cabin.pmd'.
00:35:44.272 : <ERROR> d:\buildbot\slaves\win_slave\final_build_ets2_138_windows_bin_steam_x64\build\prism\src\models\model\model_template.cpp(590): ?cache_data_handler@model_template_u@prism@@UEAAXXZ: Failed to load model descriptor (.pmd) or model geometry (.pmg) for '/vehicle/truck/scania_2016/cabin.pmg'.

Herewith my Log: https://pastebin.com/2izUHj7S

Also is there anything wrong with Mod Manager layering order from the images?

Image
Image
Image
Image

Thanks
Last edited by Ldee247 on 19 Oct 2020 23:42, edited 1 time in total.

User avatar
LadenSwallow
Posts: 276
Joined: 04 Jul 2016 07:47
Location: Nuremberg, Germany

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#298 Post by LadenSwallow » 21 Oct 2020 09:16

Ldee247 wrote:
19 Oct 2020 21:58
Also is there anything wrong with Mod Manager layering order from the images?
1) AFAIK ProMods should be put at the bottom of the mod list, not on top
2) It looks like you forgot to unpack Eugene's Scania NG !! Inside the ZIP, there is a SCS file - put this file into your mod folder, not the ZIP

User avatar
Csabee
Posts: 2504
Joined: 19 Jun 2016 13:11

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#299 Post by Csabee » 21 Oct 2020 17:55

Make sure you have the latest version from Eugene's Scania mod, and all other mods too.
Image

awpin
Posts: 2
Joined: 26 Apr 2020 20:09

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast (25.07.20)

#300 Post by awpin » 25 Oct 2020 21:27

Kast My game crashes while attaching rigid chassis to Eugine, any suggestions to fix it? Thanks Bro

Post Reply

Return to “Trucks”

Who is online

Users browsing this forum: Bartek123996, ivecorps, justinyau36, Kot.11, TanksEmAtaque, UltraGeo2000, Volkodav_1453, Woerki and 32 guests