Indicator lever for G29

[luibee]

https://www.amazon.de/ATEC-1X-Blinkersc ... m_rp_1_sbo

It is this turn signal lever, it is / was used in vehicles of the Opel brand, the metal box in which I installed the lever I already had at home, unfortunately I don't have a link
Depending on which box you use, you have to edit the turn signal lever so that it fits in (adapt connection contacts, possibly adapt the housing of the lever ......)
You might find another way to attach it to the G29, even without a metal box

I found one shop to ship to my place the lever. I found the USB too. But could you tell me what to do with these little metal parts? I have no idea

[zippe]

where it was necessary I shortened it a little and then soldered the cables from the RBT DIY ENCODER to it

[ external image ]

[GinXeng]

What's wrong with just mapping the indicators to the square and circle buttons? That's how my indicators are mapped in both ATS and ETS2 using the G29 wheel.

I dont have a G29, I use a different wheel and I map my indicators to the left and right paddle shifters, not the most realistic but it works.

[sebpv]

Hi Zippe, can you show or describe the wiring you did? I have a turn signal stalk and put a multimeter to it. I found 80% of the functions. However some switches seem tied to others. I have the exact USB encoder abd noticed that only one pair of wires is going to a plug? How did you come to that conclusion? Did you encounter problems when using svmapper? Since all the turn signals work similarly, I suppose I could benefit from your help. Thanks.