[REL] Next Generation Scania P G R S [v.2.5.4 - 30.12.2023 - SW Only]

[Polarlicht]

And then... there is this madness
It has some parts and the sideskirt over the second axle...
[ external image ]

It looked like this before conversion. They are the same vehicle.
Don't know if Scania build that like this, or if they would ship a 6x4 or something to Laxa, and they would build the 8 axle setup,
and then ship it again to the company who add even more axles as in the picture above?
It's gone to a company in Danmark called Pollux or Jan Hansen or something. Haven't found anything more about it.
[ external image ]

[JUseeTV]

These kind of trucks are equipped with cranes by MPG https://www.heavyliftnews.com/scania-ch ... and-video/ That is also the final result of the 16x4 from above

[Polarlicht]

Hey, thanks for the info. Great to have more pictures!
Its like @MrCapital 's Minions-transporter axle setup

[dawidv8]

Will you correct it?
[ external image ]

[xXCARL1992Xx]

correct what ?

[krizzy090]

permission to use your parts for the hrs scania? i m editing the hrs scania and making a kast version aka rigids

[Eugene]

@dawidv8, @xXCARL1992Xx, i suppose it's about foglight brightness compared to main headlights.
Yes, i fixed it, there was a bad glass material. Thanks for reminder


@krizzy090 no idea what's hrs scania, but you can do anything you want as long as
1) it's not paymod
2) you post credits if things are released to public

[krizzy090]

@dawidv8, @xXCARL1992Xx, i suppose it's about foglight brightness compared to main headlights.
Yes, i fixed it, there was a bad glass material. Thanks for reminder


@krizzy090 no idea what's hrs scania, but you can do anything you want as long as
1) it's not paymod
2) you post credits if things are released to public

okay

[MAxim51x]

Evgeny, and you won't add a tachograph to the salon.There are already mods that have a tachograph Or radio

[Winchester1979]

Don't know if Scania build that like this, or if they would ship a 6x4 or something to Laxa, and they would build the 8 axle setup,

The original configuration (10x4*6 rigid) is factory Scania, as it's a configuration available in the Scania Configurator (unlike the 4- and 5-axle tractor chassis). The eight axle configuration is done by some custom shop. I remember reading about it but I can't remember the name of the shop that did it.

Am a little confused why they spent the extra for a 10x4*6 if they were planning on chopping off everything behind the second axle - an 8x2 would probably have been a lot cheaper for that purpose, but I'm not an expert.