I used a modded driver for my first try to look at the new Renault DLC.
I made sure all Renault T mods were de-activated before launching that driver.
That meaning, it shouldn't show any issues.
By launching that driver, I directly went to the Renault shop to customize and buy a brand new truck.
This didn't include mods that would affect the truck itself (interior toys mostly, exterior 4x the same bull bar lights)
No issues found so far, other then the nodes being very close together at times and some interior nodes that should
be accessable from the inside only were on the outside for some reason. (SCS, please do sort this out)
When I decided to drive my truck I wanted to do the standard things first before driving.
Make sure my seat was in the right place, right view etc.
Then start on the mirrors, this is where I directly noticed that something wasn't quite right.
The mirrors did NOT show the truck.
I decided to test this out on a BRAND NEW DRIVER, NO MODS.
Made sure I took the Renault T as my truck for my first job.
And again, nothing in the main mirrors.
To be sure it wasn't my pc somehow, I decided to do a restart of the game, but same result.
Conclusion: The problem is most likely a bug
NOTE: I am talking about the big mirrors on each side. I do NOT speak about any of the others which seem to be just fine!
The issue doesn't seem to be always present oddly enough, as after these tests I decided to go on yet another driver (I have at least 10)
This time no issues with the main mirrors, even after driving for a hour. So something odd is going on.
Renault T - Main Mirrors not showing truck
Re: Renault T - Main Mirrors not showing truck
you need to add image or video evidence and your game.log file, Please
- pigbrother
- Posts: 3321
- Joined: 03 Jun 2016 07:36
- Location: Bucharest, Romania
- Contact:
Re: Renault T - Main Mirrors not showing truck
Most likely is the same old alignment bug
viewtopic.php?p=1664265&hilit=renault#p1664265
viewtopic.php?t=304813
The bug is vizibile only with normal "g_phys_mirrors 0", with 1 it looks fine but being a hidden parameter, most people don't use it (I think).
viewtopic.php?p=1664265&hilit=renault#p1664265
viewtopic.php?t=304813
The bug is vizibile only with normal "g_phys_mirrors 0", with 1 it looks fine but being a hidden parameter, most people don't use it (I think).
I have approximate knowledge of many things
- KingOfTheRoad77
- Posts: 228
- Joined: 07 May 2021 13:27
- Contact:
Re: Renault T - Main Mirrors not showing truck
@pigbrother
Got across this topic since the wrong mirrors of my Renault T made me mad once again...
First of all, thanks a lot, setting g_phys_mirrors 1 did fix the problem
Question though:
What does it do exactly?
Can I always leave it at "1" from now on, even if I drive other trucks?
Or will this mess up mirrors of (some) other trucks...? Just have tried switching to my Actros, doesn't seem to cause issues. But there are about ten other trucks in my garage - don't want to check them out one by one right now
Thx for a short reply
Got across this topic since the wrong mirrors of my Renault T made me mad once again...
First of all, thanks a lot, setting g_phys_mirrors 1 did fix the problem
Question though:
What does it do exactly?
Can I always leave it at "1" from now on, even if I drive other trucks?
Or will this mess up mirrors of (some) other trucks...? Just have tried switching to my Actros, doesn't seem to cause issues. But there are about ten other trucks in my garage - don't want to check them out one by one right now
Thx for a short reply
Who is online
Users browsing this forum: No registered users and 3 guests