[REL] [1.47] RJL Scania G, R & Streamline v23.6.25

[Winchester1979]

@Space_Night 10x chassis are not going to be removed for standard length cabins of this mod, so only Topline EXC and Longline are affected. All 10x chassis are going to be removed from the T mod however. 5th wheel position on the 10x chassis will be adjusted to better reflect real life counterparts. As far as I'm concerned the 5th wheel position is more or less correct on the 6x chassis. Some trailers, especially the SCS reefer, simply do not comply with the ISO regulation concerning the swan-neck profile of the trailer, which in turn means there is inadequate clearance. So that is a fault in the trailer, not the truck.

Now I'm wondering if anyone has made a mod that fixes this somewhere? Because that sounds like a thing that wouldn't be too massively difficult.

[Space_Night]

turns out the issue is with the trailers, - they have the pin too far back for 6x chassis (because SCS always forget about the 6x chassis as 4x is most common on the continent

[xXCARL1992Xx]

if this would be the case i wouldnt be ably to use any trailer with my Next Gen Scania 6x2, the 5th wheel is not placed right, there is a set length for it where it can vary in between

https://til.scania.com/w/bwm_0000453_01

the trailer have the kingpin all at the same location, especially the Krone and Schwarzmüller ones are made by spec with the max distance from the front of the trailer

[LoaderSaints]

I am not saying the 5th wheel position on the 6x chassis is absolutely correct in this mod as I have not touched the 5th wheel at all, yet, but shouldn't be too far off. There are quite some trailers out there, including both SCS ones and mod ones, that definitely do not comply with the ISO standard when it comes to the swan neck profile and the distance of the landing legs from the kingpin. Distance from kingpin to the front of trailer is usually correct. All vanilla trucks have the 5th wheel way too far at the rear on the 6x chassis.

Any chance of painted roof bars (sting, mirage, etc) like you have on the Sisu C/R series ? and perhaps new bullbars of a similar ilk to those on the Sisu please??

No plans for any of that I'm afraid. I am primarily just keeping the Scania mods alive instead of adding new content.

[SuperTrucker2022]

Could someone make a quick job script for all the rjl trucks?

[Lillen]

I have issues with three main mirrors: Chrome Modern + Plastic, Paint Modern and Plastic modern. The issues are no animations in the mirrors unless I have activated the F2 mirrors (SCS standard key binding) all the other main mirrors works just fine and so does the front and side mirrors.

[LoaderSaints]

@Lillen Could you post an image of the issue? Could also be caused by some tuning mod that overwrites the mirrors.

[Lillen]

What I meant was with those three mirrors, nothing in the mirrors moves is just like a "screenshot" is pasted in the mirrors with other words the image in the mirrors is just a still picture, not sure how I could show that in a screenshot. But I will try.

[LoaderSaints]

@Lillen Sounds like a mod conflict to me.

[m1keY]

sounds like similar issues when the cameramods/internal mirrors was popping up .... possibly an out-dated mod in use ?