--
Caterpillar 3412 Diesel 1250HP v12, but with small Chip Tuning. So the default max rpm is about 2200, and according to calculation the power is 932,125 kw.
The idea is to increase the rpm (normally how chip tuning is done) from 2200 to 2800, and changing the engine volume from 15.9 to 19.8 ~ roughly 20, so called swapping crankshaft and piston diameter.
--
Initial Calculation:
Old Value: HP 1250 v12, 15.9, 932.125 kw, x 2200 rpm, 4045.76 n.m. torque
New Value: HP 1600 v12, 20.0, 1096 kw, x 2800 rpm, 4068.88 n.m. torque
Modding:
I decided to apply those changes into the game, according to engine specs and https://modding.scssoft.com/wiki/Docume ... ngine_data, this what I have done:
Code: Select all
torque: 4068.88
volume: 20.0
torque_curve[]: (250, 0)
torque_curve[]: (500, 0.5)
torque_curve[]: (750, 0.8)
torque_curve[]: (1000, 1)
torque_curve[]: (1500, 1)
torque_curve[]: (2000, 1)
torque_curve[]: (2400, 0.8)
torque_curve[]: (2600, 0.6)
torque_curve[]: (2800, 0.4)
rpm_idle: 500
rpm_limit: 2600
rpm_limit_neutral: 2400
rpm_range_low_gear: (750, 2400)
rpm_range_high_gear: (1600, 2600)
consumption_coef: 1.2
adblue_consumption: 0.88
no_adblue_power_limit: 1.0