[1.21] DAF Drivetrain Revision

[Milosz07]

@ts1322 Why just not use his own engines?

[ts1322]

Because his engines are using stock transmissions. I would like to pair the transmissions from this mod to his engines. I know it is possible, somehow.

[Milosz07]

It's possible with some DEF-rework, Zee always provides normally an Open DEF - But discussing Payware Mods is not allowed here, better to stop this

[galimim]

You need to point my engines to his sound bank. Open both def files and compare the sound lines and you will see what I am on about.

Code: Select all

1) Open the mod and go to the engines you wish to change in "\def\vehicle\truck\*TRUCK YOU ARE ADJUSTING THE SOUND FOR*\engine"
2) Locate the sound data line that looks like "sound: "@include "SOUND.sui""
3) Change the *SOUND* to what the sound modder named his def files.
4) Save and repack the mod
5) Make sure the drivetrain mod loads after the sound mod!

[rookie_one]

Small comments, you configured the automated transmissions to have 3 retarder steps, when it should have 4 (the 4th bering the braking program) according to DAF manual

What I think it should look like :

Code: Select all

		retarder: 4
		auxiliary_brakes[]: (0.4, 0.4, 0)
		auxiliary_brakes[]: (0.7, 0.7, 0)
		auxiliary_brakes[]: (1.0, 1.0, 0)
		auxiliary_brakes[]: (1.0, 1.0, 1)

Also the MX11 270 for the 2021 daf (did not check for the xf 106) have this small line in error :p

Code: Select all

		rpm_range_high_gear: (5000, 1700)

[galimim]

Thanks, will fix it soon!

[Adi TNA99]

update for 1.44
daf xf 105 schumi and daf xf euro6 schumi.

[uuruur78]

hello all
i like really drive xf105 but i want retarder 3 rd step with engine brake like a xf 106
can someone help me ?

[rookie_one]

What transmission are you using ?

[dkasper00]

Experiencing a weird bug with the mod when trying to take a ferry. It doesn't let me use the ferry.