New Scania S and R power

User avatar
Tiger313
Posts: 480
Joined: 30 Aug 2015 10:55
Contact:

Re: New Scania S and R power

#31 Post by Tiger313 » 07 Jan 2018 17:06

There are doubles in ETS2
User avatar
SirVirgoTheMess
Posts: 7904
Joined: 13 Aug 2017 13:09
Location: Quebec,CA

Re: New Scania S and R power

#32 Post by SirVirgoTheMess » 07 Jan 2018 17:36

I got another question for this topic.Is pressing the throttle 3/4 way instead of full way,change something?Because,i may have found that pressing the pedal full way makes the acceleration little slower.Is it right or not?
User avatar
Max
SCS Software
Posts: 6479
Joined: 26 Nov 2012 10:00
Location: SCS, Prague

Re: New Scania S and R power

#33 Post by Max » 08 Jan 2018 18:13

nope. full is more than 3/4 always.
except one thing - adaptive automatic transmission does kickdown (downshift for better acceleration) when you press pedal to the floor. the truck accelerates faster typically but the shift itself might take some time so in result you could be slower on shorter distance.
Nobody can tell you anything about it. Those who know about it aren't allowed to talk. And those who talk know nothing.
User avatar
SirVirgoTheMess
Posts: 7904
Joined: 13 Aug 2017 13:09
Location: Quebec,CA

Re: New Scania S and R power

#34 Post by SirVirgoTheMess » 08 Jan 2018 18:28

Max wrote: 08 Jan 2018 18:13 nope. full is more than 3/4 always.
except one thing - adaptive automatic transmission does kickdown (downshift for better acceleration) when you press pedal to the floor. the truck accelerates faster typically but the shift itself might take some time so in result you could be slower on shorter distance.
Thanks for the info!
User avatar
jaws
Posts: 1264
Joined: 06 Feb 2016 09:19

Re: New Scania S and R power

#35 Post by jaws » 08 Jan 2018 18:48

If you think the Scania NG is slow, then it's your adaptive automatic transmission setting. I use Eco mode and that is "slower" than disabled. But im not trying to be in a race :D Im driving a truck.
8-) I am Always on latest patch.
Forum TUT! SCS Support->-> support@scssoft.com
I dont use mods....(Or maybe i will soon again..)
User avatar
SirVirgoTheMess
Posts: 7904
Joined: 13 Aug 2017 13:09
Location: Quebec,CA

Re: New Scania S and R power

#36 Post by SirVirgoTheMess » 08 Jan 2018 19:00

In the moment,i dont use adpative transmission.But when i use it,i select normal mode.Should i keep the adaptive transmission off,use normal mode,or use another mode?
User avatar
jaws
Posts: 1264
Joined: 06 Feb 2016 09:19

Re: New Scania S and R power

#37 Post by jaws » 08 Jan 2018 19:03

@Spn91, i like some more info, what engine and what gearbox did you pick for the truck and what settings, do you use G27 wheel or controller?
Also, what trailer loads, only heavy loads or also small/light loads?
8-) I am Always on latest patch.
Forum TUT! SCS Support->-> support@scssoft.com
I dont use mods....(Or maybe i will soon again..)
User avatar
BK Vissers
Posts: 11650
Joined: 05 Nov 2016 16:02
Location: Canada
Contact:

Re: New Scania S and R power

#38 Post by BK Vissers » 08 Jan 2018 19:03

Again comparing apples to apples, with my Scania R580 Old Gen I keep adapative activated and in normal mode.
User avatar
SirVirgoTheMess
Posts: 7904
Joined: 13 Aug 2017 13:09
Location: Quebec,CA

Re: New Scania S and R power

#39 Post by SirVirgoTheMess » 08 Jan 2018 19:08

jaws wrote: 08 Jan 2018 19:03 @Spn91, i like some more info, what engine and what gearbox did you pick for the truck and what settings, do you use G27 wheel or controller?
Also, what trailer loads, only heavy loads or also small/light loads?
For the truck in my video,i used 580 hp engine,with 6x2 chassis and the last transmission(the Opticruise 12+2 gears and retarder).I use a wheel,the Thrustmaster Ferrari Red legend,for the automatic shifting,i use a TH8A shifter.For the loads,i pick what i can and the destination i want to go.All kinds of trailers,most of the time.Now,i drive another truck,which is a Scania R560(the 1st Scania),in 4x2 config + the 1st transmission(with retarder).As stated by some people,4x2 seems the way to go.
User avatar
jaws
Posts: 1264
Joined: 06 Feb 2016 09:19

Re: New Scania S and R power

#40 Post by jaws » 08 Jan 2018 19:36

@Spn91, i just did some simple start and stop with 6x2/4midlift 520Hp Opticruise 12+2 and real automatic with high power mode and the disabled, those two are "faster" than my eco mode.
I then took a new gearbox, the "normal" 12 speed w retarder GRSO 905R and the same real automatic and high power mode and that seem to be faster from start with a normal cargo trailer 17Ton load than the 12+2 gearbox.
I used a xbox controller for windows on this test. It was faster, but i still like my Eco mode. :P
I hope this helps you out.
8-) I am Always on latest patch.
Forum TUT! SCS Support->-> support@scssoft.com
I dont use mods....(Or maybe i will soon again..)
Post Reply

Return to “General discussion about the game”

Who is online

Users browsing this forum: alluke, CrazyGijs, HyrfeX12, RexTV, ZeFrango and 12 guests