Getting 3 gear sets working on a G27

[American_Rider]

Unable to find any doc, readme or other reference on how to configure 6 gear shifters when 3 gear sets are involved. Working Eaton Fuller 18-speed gear boxes IRL is a complicated affair but I'm sure a simplified proceedure has been worked out in ATS.

I've gotten 1st to 6th and 13th to 18th working together on a G27 but getting to speed has torture and not very realistic Any help or guidance on the setup and proceedure to get a 7th to 12th mid gear set toggling between the high and low gear sets would be appreciated.

[Max]

there are two toggles. first makes big change, second make small change.
so if you have range shifter layout chosen, you will switch T1 for +12, and T2 for +6.

so, go start on 1-6 range, then enable T2 for 7-12 range, then enable T1 (and disable T2) for 13-18 range.
if you have modded 24-speed transmission, you can reach 19-24 range with both toggles enabled eventually.

[Avanti2000]

can we have real basic gearbox eaton fuller? the low gear are in bottom left, reverse on the top left

[Max]

its there - just select proper layout.

[Avanti2000]

Sorry, i found it Thanks you and enjoy !