Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
Forum rules
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
tweaking, editing the definitions for configurations ...putting variants of the trailers together
above, a simple task adding the dolly to the normal HCT ...last trailer was with a hook aswell,
so I could have added some more, but thiswas just a test, I can't manage to drive these combinations elsewhere, but the highways
main issue is the hard work it takes to customize every added trailer ...
would've been nice if there was a feature to link every trailer in the combination and every modification was applied to each and everyone of them at the same time
"apply same wheel/tire/hub/nuts to every axles..."
above, a simple task adding the dolly to the normal HCT ...last trailer was with a hook aswell,
so I could have added some more, but thiswas just a test, I can't manage to drive these combinations elsewhere, but the highways
main issue is the hard work it takes to customize every added trailer ...
would've been nice if there was a feature to link every trailer in the combination and every modification was applied to each and everyone of them at the same time
"apply same wheel/tire/hub/nuts to every axles..."
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
Well, I wasn't planning on driving it anyway, but it's fun to mess around and learn a little bit
My ETS2 workshop files: https://steamcommunity.com/profiles/765 ... pid=227300
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
Is it meant to be compatible only with the P and G cabin, because it doesn't work with the S or R.
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
@Pimari28, it works fine on S and R too.
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
it can be a modconflict if you are using other mods changing these scs trucks ...FlemmingVs Mod and the rigid for all chassis mod on the same profile
-
- Posts: 121
- Joined: 01 Jul 2021 08:00
- Location: Florida
- Contact:
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
So I tried using this last night and game keeps crashing when I either purchase the truck or changing motor. I have the required mods needed. Do I need to purchase truck from mod dealer first then go to garage to add tandem for it to not crash?
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
A game log could probably help out the folks here that understand those and can help you sort things out that way.
Most likely it's just a missing requirement or a mod conflict.
Most likely it's just a missing requirement or a mod conflict.
-
- Posts: 25
- Joined: 27 Jul 2022 17:17
- Location: Sweden
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
Hey!
Top notch mod! But I have encountered a problem.
Every time I use an Ekeri box for the truck, it crashes when I press "comfirm" after building the truck (mod shop). All other boxes works just fine except the Ekeri one.
Same thing happens even if the box is the only thing I chose and leave the rest of the truck as default.
I have tried all combinations of 6x2, 6x4 etc. Same result, and only with Ekeri.
Mod order is as recommended.
Any ideas?
Thanks
Top notch mod! But I have encountered a problem.
Every time I use an Ekeri box for the truck, it crashes when I press "comfirm" after building the truck (mod shop). All other boxes works just fine except the Ekeri one.
Same thing happens even if the box is the only thing I chose and leave the rest of the truck as default.
I have tried all combinations of 6x2, 6x4 etc. Same result, and only with Ekeri.
Mod order is as recommended.
Any ideas?
Thanks
Intel i5 8600K, 32 GB 3200 MHz RAM, GeForce 2060 6 GB, SSD-drives, 27" monitor @ 2560x1440
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
@emilthedude post you gamelog to get help
-
- Posts: 2
- Joined: 30 Jul 2022 02:31
Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)
Does this work with the steam version of Eugenes NG Scanias or do I have to have the online version for this to work, if not please let me know what I've done wrong because I have both the required mods.