Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

Forum rules
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
Locked
User avatar
m1keY
Posts: 3436
Joined: 18 Oct 2015 22:49
Contact:

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#511 Post by m1keY » 15 Jul 2022 09:21

tweaking, editing the definitions for configurations ...putting variants of the trailers together
above, a simple task adding the dolly to the normal HCT ...last trailer was with a hook aswell,
so I could have added some more, but thiswas just a test, I can't manage to drive these combinations elsewhere, but the highways 😀

main issue is the hard work it takes to customize every added trailer ...
would've been nice if there was a feature to link every trailer in the combination and every modification was applied to each and everyone of them at the same time

"apply same wheel/tire/hub/nuts to every axles..." :geek:
User avatar
Kaldie
Posts: 129
Joined: 14 Feb 2020 10:53

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#512 Post by Kaldie » 15 Jul 2022 11:46

Well, I wasn't planning on driving it anyway, but it's fun to mess around and learn a little bit :D
Pimari28
Posts: 1
Joined: 21 Jun 2022 15:04

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#513 Post by Pimari28 » 17 Jul 2022 21:20

Is it meant to be compatible only with the P and G cabin, because it doesn't work with the S or R.
User avatar
Anna K
Posts: 3489
Joined: 20 Aug 2016 04:58
Location: ᛘᛁᚦᚴᛅᚱᚦᛦ
Contact:

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#514 Post by Anna K » 18 Jul 2022 19:32

@Pimari28, it works fine on S and R too.
User avatar
m1keY
Posts: 3436
Joined: 18 Oct 2015 22:49
Contact:

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#515 Post by m1keY » 18 Jul 2022 19:36

it can be a modconflict if you are using other mods changing these scs trucks ...FlemmingVs Mod and the rigid for all chassis mod on the same profile
Twisted1013
Posts: 121
Joined: 01 Jul 2021 08:00
Location: Florida
Contact:

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#516 Post by Twisted1013 » 26 Jul 2022 15:22

So I tried using this last night and game keeps crashing when I either purchase the truck or changing motor. I have the required mods needed. Do I need to purchase truck from mod dealer first then go to garage to add tandem for it to not crash?
User avatar
Anna K
Posts: 3489
Joined: 20 Aug 2016 04:58
Location: ᛘᛁᚦᚴᛅᚱᚦᛦ
Contact:

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#517 Post by Anna K » 27 Jul 2022 10:41

A game log could probably help out the folks here that understand those and can help you sort things out that way.
Most likely it's just a missing requirement or a mod conflict.
emilthedude
Posts: 20
Joined: 27 Jul 2022 17:17
Location: Sweden

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#518 Post by emilthedude » 27 Jul 2022 17:22

Hey!

Top notch mod! But I have encountered a problem.

Every time I use an Ekeri box for the truck, it crashes when I press "comfirm" after building the truck (mod shop). All other boxes works just fine except the Ekeri one.
Same thing happens even if the box is the only thing I chose and leave the rest of the truck as default.

I have tried all combinations of 6x2, 6x4 etc. Same result, and only with Ekeri.

Mod order is as recommended.

Any ideas?

Thanks
Intel i5 8600K, 32 GB 3200 MHz RAM, GeForce 2060 6 GB, SSD-drives, 27" monitor @ 2560x1440
User avatar
umri20
Posts: 276
Joined: 15 Aug 2018 12:19
Location: Israel
Contact:

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#519 Post by umri20 » 28 Jul 2022 17:11

@emilthedude post you gamelog to get help
mrboomstick2
Posts: 2
Joined: 30 Jul 2022 02:31

Re: Rigid Chassis Addon for Eugene's Scania NG by Kast 13.05.22)

#520 Post by mrboomstick2 » 30 Jul 2022 02:34

Does this work with the steam version of Eugenes NG Scanias or do I have to have the online version for this to work, if not please let me know what I've done wrong because I have both the required mods.
Locked

Return to “Trucks”

Who is online

Users browsing this forum: Brador, hallafolkens and 24 guests