Scania 2016 S & R Custom Dashboards v1.9 (Updated)

[Monstaaaa]

Hi, I sat down again at the weight display.
unfortunately there is 1 problem.

I need 3 IDs for the weight display, but I only have 2.

ID 1560 = Is a load attached Yes / No
ID 1565 = Orientation and range of suspension load bar.

I'm missing the 3 ID where the game tells me which unit of measurement.

Water has 3 IDs

1090 = water temperature
1150 = water temperature bar
1155 = orientation and range of water temperature bar

But I can make it so that if there is no trailer on the truck, no value is displayed. If a trailer is connected, it shows a value (with and without charge itself) that I entered (11.3 / 12.1).

What do you say to that?

I guess you can make 2.7 per rear axle as default without trailer and do 11.3/12.1 when trailer is connected if its possible

[Blitzigel]

Hi, I sat down again at the weight display.
unfortunately there is 1 problem.

I need 3 IDs for the weight display, but I only have 2.

ID 1560 = Is a load attached Yes / No
ID 1565 = Orientation and range of suspension load bar.

I'm missing the 3 ID where the game tells me which unit of measurement.

Water has 3 IDs

1090 = water temperature
1150 = water temperature bar
1155 = orientation and range of water temperature bar

But I can make it so that if there is no trailer on the truck, no value is displayed. If a trailer is connected, it shows a value (with and without charge itself) that I entered (11.3 / 12.1).

What do you say to that?

I guess you can make 2.7 per rear axle as default without trailer and do 11.3/12.1 when trailer is connected if its possible

I'm in the process of making it like this

Truck without trailer 2.3
Truck with trailer 12.3
Truck with trailer and load 12.3

Scs file 6x4_long

kerb_weight[]: 5650
kerb_weight[]: 2335
kerb_weight[]: 2335

unless someone can help me

the numbers / values ​​change, depending on the trailer and load

[Monstaaaa]

yeah this is way more realistic idk if its possible to have cargo shown also that value of 12.3 shows trailer weight on axle or both axles at same time?

[kking158]

Is it possible to update the link to the lastest version? A real big thank you for making this awesome mod!

[Blitzigel]

Is it possible to update the link to the lastest version? A real big thank you for making this awesome mod!

I'm still testing and adjusting a few small things

[Blitzigel]

Here is a small picture update.
However, the font color is still changed from white to green. Unfortunately it only works with 2.3 and 12.8.
2.3 is on layer 1
12.3 on layer 2
so the value 2.3 is covered, if I took other numbers you would see them.


[ external image ]
[ external image ]

[Monstaaaa]

Still awesome work. also can that font be changed to same green? Can't wait to test this rn

[Blitzigel]

I tested something now.

I've noticed a problem.

If only I had the trailer on. is the 12.8 above the 2.3.
but as soon as I have a load on the trailer, the 12.8 is no longer on the 2.3 but over. Visible in the picture.
The number moves / increases parallel to the green bar.
So the 12.8 will not exist / the function does not exist that when the trailer is coupled, whoever appears.
Unless one is better here in the forum can help me with the problem. But I think as long as SCS doesn't have an ID for the axle load, there won't be a number that changes either.

[ external image ]
[ external image ]

[JoTaDa]

@Blitzigel, Can you put on use empty id's?

1180 - unused
1185 - unused

[Blitzigel]

@Blitzigel, Can you put on use empty id's?

1180 - unused
1185 - unused

Has no effect in game.
The ID is not assigned.

I wrote to SCS, let's see if it does anything