Scania V8 Open pipe with Lepidas Team exhaust system (Hotfix V2.0.1 Released)
Forum rules
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
I do not know why but I do not want this mod to work, I do according to the instructions and it does not switch bitch ... And I checked and I do not have other sound mods.
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
@KingOfTheRoad77 ok this gonna be specific
1. select GRSO926R
2. select your chassis
3. select 950HP
1. select GRSO926R
2. select your chassis
3. select 950HP
I make mods
yeah that's pretty much it
yeah that's pretty much it
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
00:01:29.317 : [Vehicle accessory]: 'grso926r.327.scania.s_2016.transmission' /def/vehicle/truck/scania.s_2016/transmission/grso926r.327.sii $16000 lv0
00:01:45.422 : [Vehicle accessory]: '4x2v8a.scania.s_2016.chassis' /def/vehicle/truck/scania.s_2016/chassis/4x2_v8a.sii $13520 lv15
00:01:47.240 : [Vehicle accessory]: '4x2v8.scania.s_2016.chassis' /def/vehicle/truck/scania.s_2016/chassis/4x2_v8.sii $13520 lv15
00:02:06.411 : [Vehicle accessory]: 'dc16_950.scania.s_2016.engine' /def/vehicle/truck/scania.s_2016/engine/dc16_950.sii $25000 lv0
00:02:06.415 : <ERROR> Transmission accessory is missing!
00:01:45.422 : [Vehicle accessory]: '4x2v8a.scania.s_2016.chassis' /def/vehicle/truck/scania.s_2016/chassis/4x2_v8a.sii $13520 lv15
00:01:47.240 : [Vehicle accessory]: '4x2v8.scania.s_2016.chassis' /def/vehicle/truck/scania.s_2016/chassis/4x2_v8.sii $13520 lv15
00:02:06.411 : [Vehicle accessory]: 'dc16_950.scania.s_2016.engine' /def/vehicle/truck/scania.s_2016/engine/dc16_950.sii $25000 lv0
00:02:06.415 : <ERROR> Transmission accessory is missing!
- KingOfTheRoad77
- Posts: 236
- Joined: 07 May 2021 13:27
- Contact:
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
Which GRSO926R of them ... ?
[ external image ]
... besides the fact that the marked one is already choosen...
EDIT:
I just checked whether the CtD might be related to the chassis "LowDeck for Eugene" mod or the "Dynamic Suspension for Eugene" mod - but it isn't: Deactivated the Dynamic Suspension and then chosen a default Eugene chassis - but it is still crashing anyway:
00:02:40.991 : [Vehicle accessory]: 'grso926r.342.scania.s_2016.transmission' /def/vehicle/truck/scania.s_2016/transmission/grso926r.342.sii $16000 lv0
00:02:40.997 : <ERROR> Invalid addon data (/def/vehicle/truck/scania.s_2016/accessory/intlight_bgr/harv_bl.sii)!
00:02:41.006 : <ERROR> Invalid addon data (/def/vehicle/truck/scania.s_2016/accessory/intlight_bgr/harv_bl.sii)!
00:02:54.335 : [Vehicle accessory]: 'dc16_950.scania.s_2016.engine' /def/vehicle/truck/scania.s_2016/engine/dc16_950.sii $25000 lv0
00:02:54.340 : <ERROR> Transmission accessory is missing!
00:02:54.340 : <ERROR> Invalid addon data (/def/vehicle/truck/scania.s_2016/accessory/intlight_bgr/harv_bl.sii)!
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
@KingOfTheRoad77 @banditv8
ok so use addon
https://sharemods.com/y1brxd8jdnmd/euge ... n.zip.html
with this, if you select grso926/926r you could select any chassis and engines without any problem
ok so use addon
https://sharemods.com/y1brxd8jdnmd/euge ... n.zip.html
with this, if you select grso926/926r you could select any chassis and engines without any problem
I make mods
yeah that's pretty much it
yeah that's pretty much it
- KingOfTheRoad77
- Posts: 236
- Joined: 07 May 2021 13:27
- Contact:
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
@SlavJerry Once again a big "thank you" for your quick support
Well - it doesn't crash any more - but I only get standard vanilla sound after having applied the 950 or 1000+ HP engine...
Something still is a bit messed up with the Eugene adaptation.
For the moment, I'll go back to your Sneepel I've found a volume slider setup which works quite well although it is certainly not a perfect 1.43 setting. But it's okay
A little off-topic:
I also tried the "Open Pipe with FKM Garage" V2.0 and V3.0 - but it didn't convince me completely: In V3.0 the engine one the one side has much too much bass for my taste, whereas the exhaust lost some of it compared to V2.0 - and V2.0 sounds good if just activated without changing the engine (so it just overrides Eugene's defaults), but of course it lacks a little 1.43-upgrade
So for the moment, my personal ranking of your pipe mods is:
1. Sneepel (with volumes adapted)
2. FKM Garage V2.0
3. FKM Garage V3.0
4. Lepidas ... well - I still can't say
In any case quite a good and impressive work over all, and of course, just as with paint jobs, it's always a question of personal taste.
Looking forward to any further of your sound mods that might come
Well - it doesn't crash any more - but I only get standard vanilla sound after having applied the 950 or 1000+ HP engine...
Something still is a bit messed up with the Eugene adaptation.
For the moment, I'll go back to your Sneepel I've found a volume slider setup which works quite well although it is certainly not a perfect 1.43 setting. But it's okay
A little off-topic:
I also tried the "Open Pipe with FKM Garage" V2.0 and V3.0 - but it didn't convince me completely: In V3.0 the engine one the one side has much too much bass for my taste, whereas the exhaust lost some of it compared to V2.0 - and V2.0 sounds good if just activated without changing the engine (so it just overrides Eugene's defaults), but of course it lacks a little 1.43-upgrade
So for the moment, my personal ranking of your pipe mods is:
1. Sneepel (with volumes adapted)
2. FKM Garage V2.0
3. FKM Garage V3.0
4. Lepidas ... well - I still can't say
In any case quite a good and impressive work over all, and of course, just as with paint jobs, it's always a question of personal taste.
Looking forward to any further of your sound mods that might come
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
@KingOfTheRoad77 oh sorry I forgot to add sound reference to scania s series
here's the fixed one https://sharemods.com/46zfgf4ju6ke/Scan ... _.zip.html
here's the fixed one https://sharemods.com/46zfgf4ju6ke/Scan ... _.zip.html
I make mods
yeah that's pretty much it
yeah that's pretty much it
- KingOfTheRoad77
- Posts: 236
- Joined: 07 May 2021 13:27
- Contact:
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
@SlavJerry Thanks once again, now it works
I already added Eugene's 770 HP to the engines, and it works perfectly
Just as with FKM V3.0, I think, the engine sound has little too much bass. I have attached bass speakers to my gaming chair, and I have to reduce their volume for Lepidas 2.0 (as well as for FKM V3.0) by 15-20% until it gets comfortable again. But I am also playing in VR and with a headset, and there, the bass sometimes is rattling dull like a motorcycle / chopper waiting at a traffic light This gets a bit stressful and tiring after a certain time, for my taste.
So, perhaps you might think about it and consider reducing bass a little bit for a version 2.1 or 2.5 - but that's just my personal opinion.
Last but not least I was not able to change the tone yet, apparently, I did something wrong with the light horn button , something I have to try next time.
Nevertheless, great job here, too, I like it very much so far ; could become my favorite if it had a little less bass so I could drive longer routes and distances
Thx for your support
I already added Eugene's 770 HP to the engines, and it works perfectly
Just as with FKM V3.0, I think, the engine sound has little too much bass. I have attached bass speakers to my gaming chair, and I have to reduce their volume for Lepidas 2.0 (as well as for FKM V3.0) by 15-20% until it gets comfortable again. But I am also playing in VR and with a headset, and there, the bass sometimes is rattling dull like a motorcycle / chopper waiting at a traffic light This gets a bit stressful and tiring after a certain time, for my taste.
So, perhaps you might think about it and consider reducing bass a little bit for a version 2.1 or 2.5 - but that's just my personal opinion.
Last but not least I was not able to change the tone yet, apparently, I did something wrong with the light horn button , something I have to try next time.
Nevertheless, great job here, too, I like it very much so far ; could become my favorite if it had a little less bass so I could drive longer routes and distances
Thx for your support
-
- Posts: 57
- Joined: 19 Sep 2021 08:18
- Location: Bulgaria
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
Hey Slav quick question i wanted to private edit the lepidas sound to be something like zee's engine pack and added the 520/580/730 engines but i want to make it in a way so i can use other v8 sounds lets say max's stock v8 and then have the lepidas exhaust v8 and i did the first half of the work the engines themselves but i don't know how to seperate the sound from every other engine and leave the 3 i added and the 950 and 1000 bhp engines to be the only ones with the lepidas exhaust sound
-
- Posts: 2842
- Joined: 23 Oct 2013 21:10
- Location: Between somewhere and somewhere else
Re: Scania V8 Open pipe with Lepidas Team exhaust system (Version 2.0 Released with working 2 tones exhaust system)
@SlavJerry I think you have done a modding first congratulations buddy i dont think anyone has done a dual tone engine pack before
Who is online
Users browsing this forum: No registered users and 2 guests