[REL] Aradeth's Volvo VNL670 1.6.5 (1.43 + 1.44)

Forum rules
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
AndreasHurricane
Posts: 11
Joined: 26 Oct 2019 00:16

Re: [REL] Aradeth's Volvo VNL670 (1.42, 1.43)

#11 Post by AndreasHurricane » 05 Jan 2022 14:49

Hi,
I have another question / request:
Can you possibly make the fenders on the first rear axle a little lower? They are so high that they go into the trailer. If they were exactly as high as the rear one, that would be perfect.
Thanks for your work :)
I attach a picture to show what I mean
https://i.imgur.com/tYscdMt.png
User avatar
Digital X
Posts: 2197
Joined: 28 Oct 2013 21:22
Location: Dover, Kent, UK.

Re: [REL] Aradeth's Volvo VNL670 (1.42, 1.43)

#12 Post by Digital X » 05 Jan 2022 16:10

Yeah no problem, I originally lowered the wrong fender mesh just now, but I found the right one. There's a lot more parts on this truck than I'm used to! I see the rear fender on some chassis configurations does clip through but I believe that's the taglift.
User avatar
xXCARL1992Xx
Posts: 16527
Joined: 17 Aug 2016 12:18
Contact:

Re: [REL] Aradeth's Volvo VNL670 (1.42, 1.43)

#13 Post by xXCARL1992Xx » 05 Jan 2022 16:18

isnt the fender this high because the first axle should be a lift axle ?

this short chassis doesnt make sense with a twin wheel behind the cab because it would be to short, there is a steeraxle most of the time
| !!!NO SUPPORT OR REQUESTS OF ANY SORT VIA PM!!! | Screenshot Thread | Steam Workshop | World of Trucks Profil |
[ external image ]
User avatar
Digital X
Posts: 2197
Joined: 28 Oct 2013 21:22
Location: Dover, Kent, UK.

Re: [REL] Aradeth's Volvo VNL670 (1.42, 1.43)

#14 Post by Digital X » 05 Jan 2022 16:19

I did think that, I'll go through them and see which chassis has the lift axle.
AndreasHurricane
Posts: 11
Joined: 26 Oct 2019 00:16

Re: [REL] Aradeth's Volvo VNL670 (1.42, 1.43)

#15 Post by AndreasHurricane » 05 Jan 2022 16:22

Hi,
perfect, thanks for that :)
I think it's great that you always respond so quickly to requests and implement as far as possible.
Very big praise for it, keep up the good work :)
User avatar
Digital X
Posts: 2197
Joined: 28 Oct 2013 21:22
Location: Dover, Kent, UK.

Re: [REL] Aradeth's Volvo VNL670 (1.42, 1.43)

#16 Post by Digital X » 05 Jan 2022 16:30

Yeah it's a mid lift on the 8x4 and 8x4*4 (I think mid lift is the correct term here.)

There is a small issues of the tyres clipping through the 8x6 tandem fenders when the tag lift is activated. If you use the single fenders it's not a problem. I'll see what i can do about that.
User avatar
Digital X
Posts: 2197
Joined: 28 Oct 2013 21:22
Location: Dover, Kent, UK.

Re: [REL] Aradeth's Volvo VNL670 (1.42, 1.43)

#18 Post by Digital X » 05 Jan 2022 16:42

I've fixed an issue where the middle axle's tyres would clip through the EU fenders. I just lowered the residual_travel and hey presto, it's solved.
AndreasHurricane
Posts: 11
Joined: 26 Oct 2019 00:16

Re: [REL] Aradeth's Volvo VNL670 (1.42, 1.43)

#19 Post by AndreasHurricane » 05 Jan 2022 18:41

TYSM Bro :)

Absolut great Work!
AndreasHurricane
Posts: 11
Joined: 26 Oct 2019 00:16

Re: [REL] Aradeth's Volvo VNL670 (1.42, 1.43)

#20 Post by AndreasHurricane » 05 Jan 2022 22:33

The right Mirror has Day :D
Btw it isnt a Mirror-Reflection, this is a fixed Texture^^
https://i.imgur.com/GSc14Dh.png
No problem for me, just a friendly hint ;)
Post Reply

Return to “Trucks”

Who is online

Users browsing this forum: No registered users and 7 guests