100% map exploration - impossible to achieve atm?

[Knightrider]

Hey guys, if you're stuck with 99,99% (being at 100% before buying Montana) this bug below is likely the culprit:

[ external image ]

Atm its impossible to make this road 'discovered'. Nothing happens when driving over it.

[jarryed]

It will cause damage but teleport on top of the Jersey barrier. It seems to be set as discoverable.

I would also report it as a bug before you do jump on it.

[Knightrider]

@jarryed thanks, solved!

[Madkine]

Given that at 100% you'll have 20+ undiscovered segments, this one alone won't cause it.

[Knightrider]

I acknowledge in the OP that its possible to get 100% with several unexplored pieces of road/prefabs remaining. My previous post hinting that bug as 'culprit' was mostly to point for those that are 'hardcore' map explorers (that use map discovery mods) that piece might worth checking out because of its size in comparison to other undiscovered areas I had left (small pieces of unreachable gray areas)

[Knightrider]

@Its_QF Thanks for the reply! Good to know.

Regardless fortunately I got all those places discovered teleporting and damaging my truck a bit in the process.

Best regards

[Knightrider]

So apart from the small 'lines' of unacessible roads scattered through texas, I discovered all the driveable sections, prefabs and some unreacheable areas on top of highways... also some peterbilt prefabs that appeared undiscovered outside of texas. still stuck at 99,99%...

any place of interest (introduced in the texas update) that might be overlooked?

regards

[Steve Pitts]

I still haven't got anywhere near 100% with Texas installed and therefore cannot tell you which bits of Texas might be tough to find, but take a look at this Steam post for some ideas on things that changed with v1.46 that you might have missed: https://steamcommunity.com/app/270880/d ... 244704898/

[Knightrider]

@Steve Pitts thanks!

[pigbrother]

I looked anywhere, still at 99.99%, sad.