[REL] Reforma 2.6.7.149 | ATS 1.49 (March 3)

Forum rules
SCS as a company do not wish to have paid mods on this forum. While we understand that not all paid mods use the Intellectual Property of other companies/people, it is very hard to moderate what is and isn't acceptable when money is involved. There are also concerns that it could look unfavorable to potential work partners going forward if SCS allow mods that may potentially use unlicensed branding.
Posting in the Mods forum (ATS and ETS2) is restricted to sharing free-to-the-public mods and providing support for mods. For more details, please check the Forum Rules.
Post Reply
User avatar
Jbte
Posts: 194
Joined: 20 Jun 2017 00:39

[REL] Reforma 2.6.7.149 | ATS 1.49 (March 3)

#1 Post by Jbte » 02 Dec 2022 00:10

[ external image ]
Thread related to Reforma map mod for American Truck Simulator. Reforma covers different areas in the United States and Mexico in American Truck Simulator.

Reforma MAP mod main file;
https://truckymods.io/american-truck-si ... ps/reforma

Mega Resources is REQUIRED for the map to work;
https://truckymods.io/american-truck-si ... -resources

Sierra Nevada (Optional);
https://truckymods.io/american-truck-si ... rra-nevada

Please discuss only issues, bugs, technical problems, complaints, and suggestions following SCS forum rules.
Thank you!
Last edited by Jbte on 04 Mar 2024 03:01, edited 12 times in total.
User avatar
Jbte
Posts: 194
Joined: 20 Jun 2017 00:39

Re: [REL] Reforma 2.4.4 | ATS 1.46 (1 Dec)

#2 Post by Jbte » 02 Dec 2022 00:12

RESERVED
stchamber11
Posts: 76
Joined: 20 Sep 2021 15:06

Re: [REL] Reforma 2.4.4 | ATS 1.46 (1 Dec)

#3 Post by stchamber11 » 02 Dec 2022 18:48

Hi Jbte and welcome Back Reforma! I drive this alot, so with this new release I am driving once again. I found just a few issues so far. I am off ATS at the moment so going by description rather than route numbers
1. Dead clear wall...From Las Cruces, New Mexico, down south getting off the exit where you would prior to TX take the left to the border...instead straight past gas station to get on the highway to continue into the new TX, end of on ramp invisible wall.

2. At the end of the highway through the mountains and tunnels, toward Derango side, before highway opens to the toll booths, maybe 1/2 mile from the booths, both lanes are invisible wall.

Made it to ElBano, so far all good!!
Thanks!
User avatar
Jbte
Posts: 194
Joined: 20 Jun 2017 00:39

Re: [REL] Reforma 2.4.4 | ATS 1.46 (1 Dec)

#4 Post by Jbte » 03 Dec 2022 01:08

Hi stchamber11, I guess you still using version 2.4.3 which had both issues as you mention, I've fixed in the new version 2.4.4 released yesterday. If you see something else please let me know, thank you for using this mod.
stchamber11
Posts: 76
Joined: 20 Sep 2021 15:06

Re: [REL] Reforma 2.4.4 | ATS 1.46 (1 Dec)

#5 Post by stchamber11 » 03 Dec 2022 20:31

What are the mods that I saw today in the actual workshop on steam. Is this from Reforma or an imposter?
User avatar
Mike82
Posts: 33
Joined: 08 Jun 2016 16:36
Location: Aachen/Germany

Re: [REL] Reforma 2.4.4 | ATS 1.46 (1 Dec)

#6 Post by Mike82 » 04 Dec 2022 11:16

*stchamber11
1. Dead clear wall...From Las Cruces, New Mexico, down south getting off the exit where you would prior to TX take the left to the border...instead straight past gas station to get on the highway to continue into the new TX, end of on ramp invisible wall.
I've had the same error before. When I wanted to deliver a shipment from Chihuahua, Mexico to Houston, Texas. According to the GPS, after filling up in El Paso, I drove towards the Texas I10 highway.
Suddenly there comes an invisible wall. So I would have to turn back and then took an alternative route.
stchamber11
Posts: 76
Joined: 20 Sep 2021 15:06

Re: [REL] Reforma 2.4.4 | ATS 1.46 (1 Dec)

#7 Post by stchamber11 » 04 Dec 2022 20:31

Mike82 wrote: 04 Dec 2022 11:16
*stchamber11
1. Dead clear wall...From Las Cruces, New Mexico, down south getting off the exit where you would prior to TX take the left to the border...instead straight past gas station to get on the highway to continue into the new TX, end of on ramp invisible wall.
I've had the same error before. When I wanted to deliver a shipment from Chihuahua, Mexico to Houston, Texas. According to the GPS, after filling up in El Paso, I drove towards the Texas I10 highway.
Suddenly there comes an invisible wall. So I would have to turn back and then took an alternative route.
Hi Mike, the answer above is they uploaded a newer version because of that. I updated, and went through with no prob, so all fixed...downlead the update!
User avatar
Calibuddy99
Posts: 327
Joined: 19 Mar 2022 19:38

Re: [REL] Reforma 2.4.4 | ATS 1.46 (1 Dec)

#8 Post by Calibuddy99 » 05 Dec 2022 05:03

stchamber11 wrote: 03 Dec 2022 20:31 What are the mods that I saw today in the actual workshop on steam. Is this from Reforma or an imposter?
If you mean a map mod, then it is an imposter because scs does not allow map mods on steam workshop.
Nothing to say here anymore.
User avatar
Seifer1968
Posts: 212
Joined: 14 Aug 2017 08:10
Location: Italy

Re: [REL] Reforma 2.4.4 | ATS 1.46 (1 Dec)

#9 Post by Seifer1968 » 06 Dec 2022 19:37

I found a little error in console:

Code: Select all

<ERROR> Unknown climate arid_hot
How can I fix it?
I write in very bad English ... Sorry!
User avatar
LATrucker
Posts: 513
Joined: 19 May 2018 17:01

Re: [REL] Reforma 2.4.4 | ATS 1.46 (1 Dec)

#10 Post by LATrucker » 06 Dec 2022 23:05

Do you use the weather mod? There's a fix for this error: viewtopic.php?t=314836
Post Reply

Return to “Maps”

Who is online

Users browsing this forum: No registered users and 5 guests