Hi all
Having a small problem with the pedals for my G920.
Somehow I can't get the breakepedal to work.
I can get the clutchpedal to do the the breaking, but not the breakepedal it selv...
Some help on how to get the breakepedal to respond when I push on it
Any one. A little help
G920 Swapped pedals
Re: G920 Swapped pedals
Hello
The thing with the brake pedal is now very strange that it doesn't work.
Try this I got from support:
• Calibrate the wheel using the Windows Game Controller settings.
1. Make sure you have the latest version of the Logitech GHub software for the wheel installed
2. Connect the steering wheel directly to a USB 2.0 port on the computer. Bypass any use of KVM switches, USB hubs, port replicators and docking stations.
3. Press Windows + R key to open the Run command box.
4. Type joy.cpl to open Windows Game Controller settings.
5. Select the Wheel of Fortune entry.
6. Press CTRL + SHIFT while clicking Properties.
7. Go to the Settings tab and click Calibrate.
8. Follow the calibration instructions and then test the wheel.
• Uninstall reload driver
Go to Device Manager (right click on Windows/Start icon)
Expand Human Interface Device
Look for Logitech G920 (USB)
Right-click and then select Uninstall or Remove
Disconnect the device and restart the computer.
Test
My tip would be to uninstall everything and download the new version and install it with admin rights.
Otherwise I would contact Logitech support, it sounds to me like it's a hardware error.
MfG
Michi10
The thing with the brake pedal is now very strange that it doesn't work.
Try this I got from support:
• Calibrate the wheel using the Windows Game Controller settings.
1. Make sure you have the latest version of the Logitech GHub software for the wheel installed
2. Connect the steering wheel directly to a USB 2.0 port on the computer. Bypass any use of KVM switches, USB hubs, port replicators and docking stations.
3. Press Windows + R key to open the Run command box.
4. Type joy.cpl to open Windows Game Controller settings.
5. Select the Wheel of Fortune entry.
6. Press CTRL + SHIFT while clicking Properties.
7. Go to the Settings tab and click Calibrate.
8. Follow the calibration instructions and then test the wheel.
• Uninstall reload driver
Go to Device Manager (right click on Windows/Start icon)
Expand Human Interface Device
Look for Logitech G920 (USB)
Right-click and then select Uninstall or Remove
Disconnect the device and restart the computer.
Test
My tip would be to uninstall everything and download the new version and install it with admin rights.
Otherwise I would contact Logitech support, it sounds to me like it's a hardware error.
MfG
Michi10
Re: G920 Swapped pedals
Hi Michi10
I probably didn't get to say that. But it's in ETS2 that I can't get the brake pedal to work.
It works fine outside ETS2. I've tried resetting everything in the game and starting over, but it's still the same.
It's like it can't find the brake pedal. I can make the clutch pedal become the brake.
But then I get 2 accelerator pedals.
Some thoughts on this
Regards
Vayrac
I probably didn't get to say that. But it's in ETS2 that I can't get the brake pedal to work.
It works fine outside ETS2. I've tried resetting everything in the game and starting over, but it's still the same.
It's like it can't find the brake pedal. I can make the clutch pedal become the brake.
But then I get 2 accelerator pedals.
Some thoughts on this
Regards
Vayrac
Re: G920 Swapped pedals
have you tried with the acc being centered and the brake being invereted and centered?
there's this things called scs and steam witch don't know how controllers work recently and make a huge mess
there's this things called scs and steam witch don't know how controllers work recently and make a huge mess
Re: G920 Swapped pedals
@Aquaris But now I have to agree with you 100%.
I've noticed it too, but not only that the drivers are sometimes not accepted.
@dk_vayrac: Please copy your profile folder with config.cfg and controls.sii and config_local.cfg into an extra folder and zip it and send it to me.
Because that's getting very strange to me now because I have the same steering wheel and it's more than just a coincidence for me.
I've noticed it too, but not only that the drivers are sometimes not accepted.
@dk_vayrac: Please copy your profile folder with config.cfg and controls.sii and config_local.cfg into an extra folder and zip it and send it to me.
Because that's getting very strange to me now because I have the same steering wheel and it's more than just a coincidence for me.
Re: G920 Swapped pedals
Hi Michi10
Hope you got the files.
Let me know if there are more files you need
Regard
Vayrac
Hope you got the files.
Let me know if there are more files you need
Regard
Vayrac
Who is online
Users browsing this forum: The Bishop and 17 guests